SENTINEL SC‑200 No Odor Mastic Remover (5 GL)
- Economical formula
- No-odor formula
- High coverage rates (80–150 sq ft)
- Removes black mastic
- Flashpoint: 200°F
SENTINEL SC-200 No Odor Mastic Remover is an economically priced, no-odor mastic remover made specifically for the removal of black mastic commonly found under 9" and 12" vinyl floor tile.
- Physical state: Liquid
- Appearance: Clear
- Color: None to Amber
- Odor: Mild solvent odor
- pH: Not applicable
- Boiling point: 363–381°F
- Flash point: 200°F
- Vapor pressure: <[email protected]°F
- VOC Content: <15g/l*
* When determining VOC content in accordance with the requirements set forth by the Ozone Transport Commission (OTC), effective 01-01-2009
(Always follow directions on product label)
Step One: Before beginning work, be sure to protect all walls, flooring, carpeting cracks, or wood with an absorbent (rags, kitty litter, sawdust) to keep liquefied mastic contained. This will ensure easier cleanup and reduce potential problems with the installation of new flooring.
Step Two: Once floor tile is removed, apply SC-200 to the mastic using a sprayer or mop to evenly distribute the material. Allow product to soak and penetrate for 10-15 minutes.
Step Three: Using scrapers, remove the softened adhesive from the floor. Reapply product to remaining reside.
Repeat as necessary.
Step Four: Using brooms or floor scrubbers, agitate remaining mixture and remove all liquids using absorbents.
Step Five: Once the mastic and remover are removed, wash all remaining residue from the floor. Allow th floor to dry before installing new flooring.
|Application Method||Spray, Wipe/Mop|
|Approved Use||Mastic Removal|
|Manufacturer Model Number||SC200|