3M™ 7500 Series Half Face Respirator
- Low maintenance
- Numerous cartridge/filter options
- This product contains no natural rubber latex
The 3M Half Facepiece Reusable Respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M Cool Flow™ Valve helps make breathing easier and can reduce heat and moisture buildup for cool, dry comfort.
For use with 3M Cartridges 6000 Series; 3M Filters 2000, 2200, 7000, or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.
Features and Benefits:
- Advanced silicone material for increased comfort and greater durability
- Proprietary 3M CoolFlow Valve helps make breathing easier and can offer cooler and drier comfort
- Dual-mode head harness adjusts easily so users can wear the respirator in either standard or drop-down mode
- Solid exhalation valve cover directs exhaled breath and moisture downward, helps protect the valve area from debris, and makes it easier for cleaning
- Head harness assembly and spare parts available
- Comes with reclosable storage bag
When properly fitted and used with approved 3M Cartridges and Filters, this respirator helps provide respiratory protection from a variety of gases, vapors, and particulate hazards at concentrations up to 10 times the permissible exposure limit (PEL).
Warning: Not for use in environments that are immediately dangerous to life or health (IDLH)
- Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this respirator during all times of exposure can reduce respirator effectiveness and may result in sickness or death.
- Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134, such as medical evaluation, training, and fit testing, and applicable OSHA substance specific standards. In Canada, follow the recommendations of CSA Z94.4 and/or requirements of the applicable jurisdiction, as appropriate.
- The airborne contaminants, which can be dangerous to your health, include those that are so small you cannot see them.
- Leave contaminated area immediately and contact supervisor if you smell or taste contaminants or if dizziness, irritation, or other distress occurs.
- Store respirator away from contaminated areas when not in use.
- Dispose of used product in accordance with applicable regulations.
- This respirator does not supply oxygen when used in air-purifying mode. Do not use in atmospheres containing less than 19.5% oxygen.
- Do not use when concentrations of contaminants are immediately dangerous to life and health, are unknown, or when concentrations exceed 10 times the permissible exposure limit (PEL) in air-purifying mode when qualitatively fit tested, 50 times the PEL in air-purifying mode when quantitatively fit tested, 1,000 times PEL in supplied air mode, or according to specific OSHA standards or applicable government regulations, whichever is lower.
- Do not alter, abuse, or misuse this respirator.
- Do not use with beards, facial hair, or other conditions that prevent a good seal between the face and the faceseal of the respirator.
|Half Face Respirators