Dri-Eaz Drizair 1200 Dehumidifier Replacement Parts
The DrizAir 1200 Dehumidifier from Dri-Eaz removes 64 pints at AHAM (80°F/60% Rh) with a max removal of up to 15 gallons a day. It combines all the great features of its larger cousins in a compact, portable, and stackable size that conveniently fits on your truck and maneuvers easily around the job site.
- Commercial grade refrigerant
- 64 pints water removal at AHAM (80°F/60% Rh)
- Maximum water removal 132.3 pints (15 gallons)
- Touchpad control console
- Rotomolded, high-density polyethylene housing
This replacement 3M Filtrete™ High Air Flow (HAF) Filter fits the DrizAir 1200 Dehumidifier and LGR 7000XLi Dehumidifier. It protects the internal components of your equipment without restricting airflow.
- Replace after 3 cleanings
- High Air Flow (HAF) filter
- Utilizes an electrostatic charge to pull contaminants from the air
This Control Panel Kit is used on the Dri-Eaz Model 1200/2000/2400 dehumidifiers. This is the upgrade kit.$174.48
Blower assembly for the Dri-Eaz 1200 dehumidifier.
- Blower Assembly
- Dri-Eaz 1200 Dehumidifier
This 115V condensate pump is designed for use on the Dri-Eaz 1200, Evolution LGR, and LGR 2400 dehumidifiers.$139.25
Fixed Handle Kit for DP-D1200
- Handle kit
- For use with Dri-Eaz 1200
Condensate pump micro switch.
- Drizair Dehumidifiers
- Condensate Pump Micro Switch
This defrost sensor cable assembly fits the Dri-Eaz Evolution and 1200 dehumidifiers and the DrizAir 2000 and 2400 LGR dehumidifiers.$10.71
This is a 25', 16/3 power cord with a molded 3-prong male plug. This cord could be used in a wide variety of applications, but is typically found on Dri-Eaz equipment that does not use a removable power cord.
- 25 feet long
- 16/3 wire
- Molded 3-prong male plug
Clear 40-foot drain hose for dehumidifiers.
- 1/4" ID
- 3/8" OD
- 40 Foot
These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.
- 1/4" hose barb
- Male coupler
- For use with Jon-Don Ultimate 340 and Phoenix 200Max dehumidifiers
Drizair dehumidifier outlet duct collar
- 1200 2000 2400
- Outlet Duct Collar
Dri-Eaz 12" wheel.
- Non Marking Wheel
- 12" x 2" x 5/8"
These rivets hold the high-voltage board onto Dri-Eaz dehumidifiers.$0.88
Quick Connect Body 1/4" Barb for the Dri-Eaz units.
- Female Coupler
- 1/4" Barb for
- Dri-Eaz Dehumidifiers