Fiberlock HydroBrite

Boost the Power of IAQ Advanced Peroxide Cleaner (APC) with HydroBrite!

Mold and mildew stains on water damaged surfaces present a unique challenge to professional restorers. When dealing with severe stains that refuse to budge, it's time to boost the power of Fiberlock IAQ Advanced Peroxide Cleaner (APC) with HydroBrite!

This powder-based, stain-removing additive reaches deep into the substrate to eliminate the most deeply embedded dirt and debris. The adjustable formula allows you to add more or less HydroBrite depending on the level of stain severity.

Simply add 1–6 scoops of HydroBrite per gallon of Advanced Peroxide Cleaner and apply with a standard pump-up or hand trigger sprayer. Agitate the surface with a nylon bristle brush to maximize stain removal and then rinse with clean water or use a damp wipe. Full surface brightening can take up to 24 hours. 

HydroBrite is ideal for use on OSB, plywood, wood framing, and concrete—particularly porous substrates. Do not use on glass. Always protect floors and surrounding surfaces from contact. 

Note: HydroBrite is designed for use with Fiberlock IAQ Advanced Peroxide Cleaner (APC) ONLY. Do not mix with any other product.