Create a long-lasting impression by wearing and giving away booties at the beginning and end of cleaning jobs. Until you try them, you won't believe how dramatic customer satisfaction and referral results can be! One size fits all.

• Make a great impression - look more professional
• Build value-added service with your customers
• Prevent re-soiling freshly cleaned carpets
• One size fits all

Create a long-lasting impression by wearing and giving away booties at the beginning and end of cleaning jobs. Until you try them, you won't believe how dramatic customer satisfaction and referral results can be! One size fits all.

• Make a great impression - look more professional
• Build value-added service with your customers
• Prevent re-soiling freshly cleaned carpets
• One size fits all

Get extreme particle barrier protection from non-hazardous liquids. KleenGuard is made from a breathable, micro-porous film laminate and is an excellent replacement for Tyvek.

• Clearance Item; Limited quantities remaining – once they’re gone, they’re gone!
• 25 per case
• Zipper front and elastic wrists and ankles
• Passes ASTM F1670 Blood and Body Fluid Penetration

A breathable lightweight spun-bonded polypropylene material for light applications on a budget.

• Light weight
• Elastic wrists and ankles
• 25 Per Case

The perfect suit for non-hazardous carpet cleaning chores, applying coatings, and other jobs where cleanliness is important. Not water-resistant.

• Zipper front
• Attached hood and boots
• Elastic wrists and cuffs
• Sold in case of 25

This limited-use medium weight suit protects against soot, smoke, light sprays, and other residue. Perfect for fire restoration sites, it is ideal for general-purpose industrial jobs because the non-woven material coating reduces particle release.

• Attached hood and boots
• Elastic wrists and cuffs
• Zipper front and serged seams
• Protects against light water-based liquid splashes
• Sold in case of 25

When a durable, comfortable garment is needed, ProGard is the ideal choice. It meets ANSI 101-1996 and Federal Flammability ACT 16 CFR 1610, it yet acts as an excellent barrier against water-based liquids and light chemical splash.

• Attached hood and boots
• Elastic wrists and cuffs
• Zipper front and serged seams
• Protects against light water and chemical-based splashes
• Sold in case of 25

Get extreme particle barrier protection from non-hazardous liquids. KleenGuard is made from a breathable, micro-porous film laminate and is an excellent replacement for Tyvek. KleenGuard coveralls incorporate a spunbound nonwoven texture for more protection. The tough film on the coverall provides an excellent liquid barrier, while the soft nonwoven fabric provides comfort against the skin

• 25 per case
• Attached hood and boots
• Zipper front and elastic wrists and ankles
• Passes ASTM F1670 Blood and Body Fluid Penetration

This limited-use Tyvek coverall offers amazing protection against dust, soot, and soils. Lightweight, comfortable, and economical, this suit offers a zipper front, so you can slip easily in and out. Also has attached hood, boots, and elastic-banded wrists.

• Attached hood and boots
• Elastic-banded wrists and ankles
• Zipper front and serged seams
• The best balance of protection, durability, and comfort
• Inherent barrier protection against dry particulate hazards
• Even after abrasion, stops sub-micron particles better than reusable garments

Protect yourself and your employees from many bio-hazards with coveralls from Kimberly Clark. These suits have passed ASTM F1670/F1671 Blood & Body Fluid Penetration to offer you peace of mind.

• With hood and boots
• Zipper front; elastic wrists and ankles
• Passes ASTM F1670/F1671 Blood and Body Fluid Penetration

The protective fabric of these coveralls is coated with 1.25 mils of polyethylene. You get reliable protection from minor chemical spills, mist, or light splashes.

• 12 Per Case
• With Hood and Boots, Zipper Front, Elastic Wrists and Ankles
• High Visibility Yellow
• Serged Seams
• Reliable protection for minor chemical spills

Keep your employees dry with this heavy-duty 35 mil rainsuit. Made of durable PVC and polyester in high-visibility yellow. Includes overalls, jacket, and a detachable hood.

• 35 mil thickness
• Includes overalls, jacket, detachable hood
• Made of durable PVC and polyester in high-visibility yellow

Keep your employees dry with this heavy duty 35mm Rainsuit. Made of durable PVC and Polyester in high visibility yellow. Includes Overalls, Jacket, and a Detchable Hood.

• 35 Mil Thickness
• Includes: Overalls, Jacket, Detachable Hood

These over the sock boots are one-piece injection molded PVC and feature pull-up and kick-off lugs and non-slip cleated soles. Perfect for working in wet, muddy conditions. Protects to just below the knee, making them ideal for water restoration work! 

• 100% waterproof
• Seamless molded construction
• Anti-Skid™ outsole and heel
• Reinforced construction at critical stress points
• FOOT FORM contour insole

The Servus Strap-On Boot is an 16-inch tall, yellow, rubber overshoe with adjustable, snug, sidestrap. It is made of premium, lightweight rubber that stretches over work footwear. A tough, comfortable fabric lining gets these boots on and off fast!

• Flexible, hand-layered construction
• 100% waterproof
• Adjustable, snug-up side strap

A high density polyethylene hard hat with 4 point suspension system of comfortable nylon is ideal for inspection and work in hazardous areas. Protects from falling and flying materials. Excellent side impact resistance; rain trough and sweatband included.

• Adjusts from sizes 6-1/2 to 8-1/2

Designed to offer outstanding protection in hot and dangerous industries, the Skullgard Protective Cap sets the standard for environments such as steel mills. This cap can withstand radiant heat loads up to (but not exceeding) 350°F while still maintaining its protection capabilities.

• Withstands radiant heat loads up to, but not exceeding, 350°F
• Smooth crown for easy use of MSA welding equipment
• ANSI/ISEA Z89.1-2009 (Class G, Type I) Third-party certified by SEI

Designed to offer outstanding protection in hot and dangerous industries, the Skullgard Protective Hat is the ideal head protection, even in tough environments such as steel mills. This hat can withstand radiant heat loads up to 350°F while still maintaining its protection capabilities.

• Withstands radiant heat loads up to, but not exceeding, 350°F
• Smooth crown for easy use of MSA welding equipment
• ANSI/ISEA Z89.1-2009 (Class G, Type I) Third-party certified by SEI

This V-Gard® Protective Hat features a polyethylene shell that provides superior impact protection. The self-adjusting crown straps ensure a comfortable fit. Non-slotted, full brim hat design. Color: white.

• Polyethylene shell provides superior impact protection
• Self-adjusting crown straps ensure a comfortable fit
• Non-slotted, full brim hat design
• ANSI/ISEA Z89.1-2009 (Class E, Type I)

When doing strenuous labor up to 75 percent of your body heat can be lost through the head. Keep warm with this Heavy Duty Arctic Winter Liner.

• One Size Fits All
• Heavy Duty Twill Outer Material
• Sheep Thermal Lining
• Velcro Closure

When doing strenuous labor, up to 75 percent of your body heat can be lost through the head. Keep warm with this Heavy-Duty Arctic Winter Liner.

• One size fits all
• Severe cold climate range
• Extra large neck flap with velco closure
• Sheep thermal lining
• Flame-resistant treated outer shell

When doing strenuous labor, up to 75 percent of your body heat can be lost through the head. Keep warm with this Heavy-Duty Fleece Balaclava.

• 320g polyester fleece for warmth in extreme conditions
• Long length
• Reflective accent for higher visibility

This flame retardant jacket with shirt collars is great for welding or visiting job sites where flame-resistant clothing is a must. Adjustable black snaps on cuffs offer flashback protection.

• Bright green color
• 30-inch length
• Size: 2X-Large