Please select a Shopping List

Hydro‑Force, Concrete Cleaner, Viper Peroxiblast Powder, 6.5 Lbs/4cs

Item #
Case of 4
Mfr. Model #
Send to a Friend Add to My Shopping List
  • Dilution Ratios: 2-4 oz. /gal.
  • RTU pH: 12-12.2
  • Fragrance: Pine
Availability: Typically in stock (Details)

Product Information

Viper Peroxiblast Powder is a synergistic product breakthrough that cleans and decreases the grungiest concrete, tile and grout floors, fixtures, and walls with a concentrated balance of surfactants and alkaline builders that are oxygen activated. This high performance, heavy-duty concrete, tile and grout cleaner and degreaser safely replaces mineral spirits and chlorinated solvent-based heavy-duty concrete degreaser products.

Peroxiblast Powder penetrates concrete surfaces on contact to soften, lift, and remove a wide range of oils, soils, fats and greases. The effervescent solution gets into every crevice, crack and pore to emulsify, dissolve and deflocculates even the most stubborn soiling. While Peroxiblast Powder is designed to work ideally with rotary hard surface cleaning extractors like the Hydro-Force SX-12 and SX-15, it can be safely and effectively used with virtually any hard surface floor cleaning brush or mop system.


  • Concentrated powder saving cost
  • Special blend of surfactants to attack particulate soil
  • Combination of solvents and alkalinity to break down oily soil build up.
  • Resists tears and punctures
  • Formulated with oxygen booster
  • Specs


    More Information
    Scent Pine
    Dilution 2-4 oz./gal
    Material Concrete|Grout|Tile
    Category Degreasers, Grout Cleaners, Polished Concrete Cleaner, Tile Cleaners
    Brand Hydroforce
    Approved Use Janitorial Use - General Cleaning
    Chemical Type Water Based
    Condition new
    Manufacturer Model Number 2601-0227