Odorox® Boss XL3™ Hydroxyl Generator
- Voltage: 120V
- Amperage: 1.6 amp
- Recommended treatment area: 1,500 square feet
If you're working in large areas with odor issues, the ODOROX® Boss XL3™ Hydroxyl Processor is the safer, easier solution you've been looking for. This unit handles odors caused by fire damage, flooding, sewer backup contamination, chemical spills, mold, VOCs, and more!
Deodorize While You Dry!
The Boss XL3 processes a high concentration of ODOROX Hydroxyls as it decontaminates and deodorizes while you dry because it connects directly to your existing air mover. Other hydroxyl generators are standalone units with built-in fans that get the job done, but not as efficiently and effectively as the Boss XL3. With it being connected to your air mover, the hydroxyl is spread farther and faster, all while you're drying at the same time.
It is equipped with a selector switch for 2 or 3 ODOROX Hydroxyl generating optics and operates using only 1.6 amps.
Typical coverage area for this machine is 1,000 to 1,500 sq ft depending on the strength of the odor and the layout of the structure. The coverage area may be 2,000 to 2,500 sq ft for lighter odors and open floorplans.
Dimensions: 11.12" x 20.25" x 20.25"
Weight: 25 lbs.
Voltage: 120V @ 60Hz / 220V @ 50/60Hz
Power: 180 Watts (max) without blower
Control: Selector Switch & Pressure/Switch which activates from positive airflow
Meter: 1/10 quartz hour meter
Mobility: Handle/Rubber feet
Finish: Bronze powder coat
Number of Optics: 3
Air Inlet/Outlet: Louvered panel/7" Spout
Filter: One 9.75" x 10.68" x 0.50"
Certification: Meets ETL Canada/US-CSA & UL Standards, Meets CE, REACH, RoHS, Residual O3/Non-accumulative
The state of California requires the following label:
*Solely for industrial use. Potential health hazard: emits ozone.*
|Treatment Area (Cu. Ft.)||50|
|Approved Use||Smoke and Odor Remediation|