Inspecting water damaged surfaces is easy thanks to the Tramex Water Damage Restoration Inspection Kit. This handy kit features the Tramex MEP moisture meter, CMEX II concrete moisture meter, plus pins and probes for inspecting a wide variety of building surfaces.
The Tramex MEP is designed for non-invasive testing of wood, drywall, plaster, brick, tiles, resilient flooring, and other surfaces. It offers a wide range of moisture content readings from 5–30%. The MEP takes readings up to 1 1/4" (30 mm) deep without causing damage to the surface. This meter offers three ranges of sensitivity: 1) Wood, Timber/Drywall, 2) Roofing/Plaster, 3) Brick.
The Tramex CMEX II measures up to 6.9% moisture content in concrete. It also offers a convenient hold function, which allows you to freeze the reading when measuring moisture content in an area where the meter face isn't easily seen.
The CMEX II attaches to a relative humidity Hydro-i probe for in situ testing of concrete and ambient conditions, which allows for testing per ASTM F2659 or performing ASTM F2170 (and ASTM F2420 with optional Hood) for relative humidity readings in concrete slabs.
The CMEX II also features an infrared surface thermometer, which takes accurate surface temperature and dew point measurements. When used with the pin-type probe attachment, the CMEX II measures 7–40% moisture content in wood.
The Water Damage Restoration Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
|Measuring Range - CMEX II|
|Depth of penetration in concrete: (NDT*)||approx. ¾" (20 mm)|
|Moisture content for Concrete: (NDT*)||0 to 6.9 %|
|Comparative for Gypsum floor screed: (NDT*)||0 to 10|
|Reference scale: (NDT*)||0 to 100|
|Relative Humidity (Hygro-i ® probe):||0 to 99%|
|Moisture content for wood (with pin probes):||7 to 40 %|
|MEASURING RANGE - MEP|
|Depth of penetration: (NDT*)||1¼" (30mm) (in wood, drywall)|
|Moisture content for Wood: (NDT*)||5 to 30 %|
|Reference scale for building materials:||0 to 100|
|SPECIFICATIONS OF KIT|
|Size:||16.9" x 13.6" x 5.1"|
|Power:||3 x 9 volt PP3 Batteries (included)|
|* NDT - non-destructive test|
|Category||Combination/Kit, Moisture Meters, Multi-Function Meter, Non-Penetrating, Penetrating|
|Manufacturer Model Number||WDIK5.1|