Tramex

List
sort-descending
Tramex TP30 5/8‑Inch Spare Pins for Pin Probe, 30 mm (10 PK)
Tramex SKU# MP-TP30-EA
These tapered non-insulated pins are designed for use with wood and wood products. Fits handheld electrode series HH14 and HH15.
$66.72
Ships Direct From Manufacturer.
Tramex SP90 3‑Inch Spare Pins for Pin Probe (2 PK)
Tramex SKU# MP-SPI90-EA
These spare 3-inch insulated pins are designed for use with the Pin Probe HH14SP90.
$38.00
Ships Direct From Manufacturer.
Tramex SP52 1.5‑Inch Pins for Hammer Probe (10 PK)
Tramex SKU# MP-SP52-EA
These spare 1.5-inch insulated pins fit the Tramex hammer-action pin-type electrode.
$89.00
Ships Direct From Manufacturer.
Tramex SP200 7‑Inch Insulated Spare Pins for Pin Probe (2 PK)
Tramex SKU# MP-SP200-EA
These spare 7-inch insulated pins fit the Tramex Pin Probe HH14SP200.
$48.00
Ships Direct From Manufacturer.
Battery Cover for Tramex Moisture Encounter Plus
Tramex SKU# MP-NPMEPBC-EA
Replacement battery cover for Tramex Moisture Encounter Plus.
$13.45
In stock
Tramex Hammer Electrode with Cable, 1.5" Insulated Pins
Tramex SKU# MP-HA21-EA
This hammer-action pin-type electrode comes with a cable and 1.5" insulated pins. It is designed for use with the CMEX II, MRH III, and Professional moisture meters.
$310.00
Ships Direct From Manufacturer.
Tramex Calibration Salt Check
Tramex SKU# DA-SAL75-EA
The Tramex Calibration Salt Check is designed for fast and easy in-the-field calibration of the Hygro-i relative humidity probe. It produces a 75% relative humidity (RH) environment within the chamber for optimum calibration.
$78.49
Ships Direct From Manufacturer.
Tramex Roofing Master Kit
Tramex SKU# DA-RMK-EA
The Roof Master Kit is the complete kit for the Roofing Professional, including the Dec Scanner and the RWS Roof & Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 6 inches in depth.
$11,710.00
Ships Direct From Manufacturer.
Tramex Roof Master Kit
Tramex SKU# DA-RMK51-EA
This point-of-contact, non-destructive kit surveys moisture conditions in roofing and waterproofing systems up to 6 inches deep, evaluates moisture conditions in concrete and wood decks, and measures ambient relative humidity and dew point conditions.
SKU UnavailableNo Longer in Stock
Tramex Roofing Inspector Kit
Tramex SKU# DA-RIK-EA
The Roof Inspection Kit allows for point-of-contact, non-destructive inspection of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth with the RWS Roof & Wall Scanner.
$3,770.00
Ships Direct From Manufacturer.
Tramex Roof Inspection Kit
Tramex SKU# DA-RIK51-EA
Designed for easy, accurate moisture measurement of roofing and waterproofing systems, the Tramex Roof Inspection Kit delivers fast, accurate, non-destructive point-of-contact readings approximately 4 inches deep.
SKU UnavailableNo Longer in Stock
Tramex Calibration Check Plugs
Tramex SKU# DA-PTMCALST-EA
These calibration check plugs are designed for in-the-field calibration of the Tramex PTM, CMEX II, MRH III, and WME moisture meters.
$106.42
Ships Direct From Manufacturer.
Tramex Pâ„¢ 2.0 Professional Pin‑Type Moisture Meter
Tramex SKU# DA-PTM2-EA
The Professional PTM 2.0 is a digital penetrating (pin-type) moisture meter that takes precise measurements in wood. This meter has built-in standard calibrations, specific calibrations for over 500 wood species, and adjustable temperature correction.
SKU UnavailableNo Longer in Stock
Tramex Heavy‑Duty Electrode with Cable and 7" Long Pins
Tramex SKU# DA-PNPMEP-EA
This heavy-duty electrode comes with a cable and 7" long pins. It is designed for use with the Tramex CMEX II, MRH III, and PTM moisture meters.
$189.00
Ships Direct From Manufacturer.
Tramex Pest Control Professional Kit
Tramex SKU# DA-PCK51-EA
This kit allows pest control professionals to perform non-destructive testing of multiple building materials to identify moisture content. It features the MRH III moisture humidity meter plus wood probe, humidity probe, and IRTX infrared thermometer.
SKU UnavailableNo Longer in Stock
Tramex Hygro‑i® Probe with Electronic Interface
Tramex SKU# DA-HIPP1IE-EA
The Hygro-i probe is designed to be used in conjunction with the CMEX II and MRH III non-destructive moisture meters for relative humidity testing of flooring slabs and ambient conditions. Comes with one interface cable, one hold liner and cap, and an insertion tool.
SKU UnavailableNo Longer in Stock
Tramex Hygro‑i® Probe
Tramex SKU# DA-HIPP1...
Tramex Hygro-i relative humidity probes utilize advanced technology that allows concrete resurfacing professionals to perform in situ and hood-type RH testing to comply with ASTM F2170 and ASTM F2420. These probes are also ideal for use by disaster restoration professionals.

Starting at $135.00

In stock
Tramex Wood Probe with Cable and 5/8" Pins
Tramex SKU# DA-HH14TP30-EA
This heavy-duty pin-type wood probe comes with a cable and pins. It is designed for use with the Tramex CMEX II, MRH3, and PTM meters.
$169.00
Ships Direct From Manufacturer.
Tramex Heavy‑Duty Electrode with Cable & 3" Insulated Pins
Tramex SKU# DA-HH14SP90-EA
This heavy-duty, pin-type electrode includes a cable and 3" pins. It is designed for use with the Tramex CMEX II, MRH3 & PTM.
$174.00
Ships Direct From Manufacturer.
Tramex Flooring Inspection EZ Kit
Tramex SKU# DA-FZK51-EA
The Tramex Flooring Inspection EZ Kit contains the Tramex CMEX II digital moisture meter plus a Hygro-i ® Relative Humidity probe, heavy-duty pin-type probe, and 6 hole liners, all packed in a compact, easy-travel case.
SKU UnavailableNo Longer in Stock
Tramex Feedback DataLogger
Tramex SKU# DA-DLRHTA-EA
The Tramex Feedback DataLogger and App have been designed and developed for professionals who depend on accurate, reliable readings using the very best, state of the art technology.
$205.00
Ships Direct From Manufacturer.
Tramex Calibration Check Plate
Tramex SKU# DA-CALCRH-EA
This Calibration Check Plate works with the Tramex CME4 and CMEX2 concrete moisture meters.
$98.00
Ships Direct From Manufacturer.
Tramex MEP Calibration Check Box
Tramex SKU# DA-CALBXMEP-EA
This Calibration Check Box is designed for the Tramex MEP to ensure accurate measurements.
$125.00
Ships Direct From Manufacturer.
Tramex MRH3 Calibration Check Box
Tramex SKU# DA-CALBOXMR-EA
This Calibration Check Box is designed for the Tramex MRH3 to ensure accurate measurements.
$125.00
Ships Direct From Manufacturer.