Shaw Total Care "Green" Carpet STAIN & SOIL Remover Concentrate
- EPA approved for its Dfe Design for the Environment program
- Removes the toughest soils and stains
- pH: 7.5–8.5
- Approved for commercial, residential, and wool
- Variable dilutions
Enjoy a Superior Clean + Long-Lasting Stain Protection!
Superior Cleaning Power
Total Care "Green" STAIN & SOIL Remover tackles the toughest soils and stains, even old “set-in” stains release and flush away. It can be used as a pre-spray/extraction cleaner, an interim product for the encapsulation process, or a spot cleaner.
No-Rinse, Residue-Free Formula
Total Care "Green" STAIN & SOIL Remover combines specially selected nonionic and anionic surfactants with unique fluorocarbon anti-soiling chemistry.
There is no need to rinse or neutralize treated fibers after using this product. It deep cleans fibers while leaving a protective treatment on the surface that guards against future stains and soils. There are no sticky, soil-attracting residues and no stiff fibers either—just clean, soft carpet.
Long-Lasting Stain Protection
Total Care "Green" STAIN & SOIL Remover not only removes stubborn stains and soiling, but it also provides protection against reoccurring spots. Formulated with a protective treatment, just-cleaned carpet resists stains and soiling. Spots and spills wipe up easier, plus less labor is required during subsequent professional cleanings.
Use on Multiple Fiber Types
Total Care "Green" STAIN & SOIL Remover can be used on both commercial and residential stain-resistant carpet, rugs, wool, and all other water-safe fibers.
Total Care "Green" STAIN & SOIL Remover has been approved by the US EPA for its Dfe Design for the Environment Program, which recognizes safer chemistry with a minimal environmental impact.
Always test the surface to be cleaned for compatibility, and colorfastness, by applying a small amount of the diluted TOTALCARE "Green" Carpet STAIN & SOIL Remover to an inconspicuous area.
Spotter: Dilute 1:10 with water. Spray soiled are with diluted TOTALCARE "Green" Carpet STAIN & SOIL Remover, agitate and blot with a clean white cloth.Allow the area to dry for 15 to 30 minutes. For stubborn stains, it may be necessary to repeat the cleaning process. If needed, softly brush the area during application.
Pre-Spray: Dilute 1:32 with water. Pre-spray diluted TOTALCARE "Green" Carpet STAIN & SOIL Remover at 200 sq. ft per gallon. Agitation is recommended. Allow to dwell on the area for 5 to 10 minutes to penetrate into the fibers and loosen the soil. (Do not allow the product to dry.) Extract using only clean hot water.
Encapsulation: Dilute 1:32 with water. Pre-spray diluted TOTALCARE "Green" Carpet STAIN & SOIL Remover at 1,000 sq. ft. per gallon. Use appropriate equipment for agitation (counter cylindrical brushes recommended). A post vacuum in recommended after drying.
|Chemical Type||Water Based|
|Cleaning Method||Encapsulation, Hot Water Extraction, Spotting|
|pH||7.5 - 8.5|
|Category||Carpet Pre-Sprays (TLC), Shaw Approved, Spotters|
|Manufacturer Model Number||TC GSSC G01C|