SENTINEL 7200 No Odor Mastic Remover is formulated with a flashpoint greater than 200° F. It is designed to clean and remove black asphalt and solvent based mastics in odor sensitive areas such as schools, high rises, hospitals, and government and residential buildings.
DIRECTIONS: Before beginning work, protect all walls, flooring, carpeting, cracks or wood with an absorbent from liquid materials. This will ensure easier clean-up and elimate potential problems
Wet the entire adhesive surface with 7200. This may be done by spraying or mopping 7200 over the surface of the mastic. Allow 7200 to soak and penetrate into the mastic for 10 - 20 minutes.
STEP 2: Scrape or squeegee the bulk of the softened or liquefied mastic from the surface with a floor scraper (razor scraper) or floor squeegee.
STEP 3: Reapply 7200 as in step one. Agitate with a short-bristled broom, hand-held or rotating floor scrubber with stripper pads to fully lift and liquefy adhesive residue from the subfloor. The liquid may then removed with absorbent.
STEP 4: Wash and rinse the floor thoroughly with Sentinel 805 and water to ensure a clean surface. Allow to dry a minimum of 24 hours before installing new flooring.
|Manufacturer Model Number||7200|