SENTINEL 717 Thickened Mastic Remover Gel
- Clings to vertical surfaces
- VOC compliant
- Citrus fragrance
- Coverage: 50-100 sq ft per gallon
- Ready to use
SENTINEL 717 Thickened Mastic Remover Gel is designed to remove tile mastics and carpet adhesives from cracked and degraded surfaces, as well as multiple level buildings, reducing the chance of mastic and remover leaking through subfloors. Its viscosity enables it to cling to vertical surfaces, allowing the product to remove mastics from walls and stairs.
DIRECTIONS: Before beginning work, protect all walls, flooring, carpeting, cracks or wood with an aborbent from liquid materials. This will ensure easier clean-up and elimate potential problems.
STEP 1: Wet the entire adhesive surface with 717. This may be done by pouring or mopping 717 over the surface of the mastic. Allow 717 to soak and penetrate into the mastic for 45 - 60 minutes.
STEP 2: Scrape or squeegee the bulk of the softened or liquefied mastic from the surface with a floor scraper (razor scraper) or floor squeegee.
STEP 3: Reapply 717 as in step one. Agitate with a short-bristled broom, hand-held or rotating floor scrubber with stripper pads to fully lift and liquefy adhesive residue from the subfloor. The liquid may then removed with absorbent.
STEP 4: Wash and rinse the floor thoroughly with Sentinel 805 and water to ensure a clean surface. Allow to dry a minimum of 24 hours before installing new flooring.
|Manufacturer Model Number||717|