Introduced at the World of Concrete 2016
Scan Combiflex 650P
Powerful grinding that's 100% fueled by propane!
The Scan Combiflex 650 Propane is specifically designed for small to medium-sized jobs in environments with little to no access to external power. Since it is 100% fueled by propane, there is no need to worry about bringing in a generator or hiring an electrician to configure power for your equipment.
This robust grinder combines a hefty weight of 840 lbs with a 26-inch grinding path, delivering high productivity rates and a consistent performance. This grinder is large enough to make short work of wide open areas, but small enough to maneuver inside tighter spaces, such as garages and smaller buildings.
Like all Scanmaskin floor grinders, the Scan Combiflex 650 Propane features an ergonomic design that focuses the torque of the machine down at the floor where it belongs, not against the operator. Unlike other grinders that make you feel like you’re fighting a bucking bronco, the Scan Combiflex 650 Propane has very little side torque and vibration. You can push the machine along almost as easily as you would a shopping cart.
The 650 Propane is best suited for residential and light commercial applications. It easily removes multiple, heavy floor layers and can be used for wet or dry grinding and polishing of concrete, terrazzo, and natural stone.
Ideal for:
Specifications:
Weight | 840 |
---|---|
RPMs | 1200 |
Width | 26 |
Brand | Scanmaskin |
Condition | New |
Diameter (in.) | 26 |
Powered By | Propane |
Horsepower | 18 |
Category | Floor Grinders |
Warranty Information | This product from Scanmaskin Sweden AB comes with a twelve month warranty. If the product does not function satisfactorily during this period, Scanmaskin will return the product to full working order for normal use which the product is intended for – with no charge for labor or spare parts, according to the following conditions: 1. The warranty only applies to persons that have legal right to the equipment during the warranty period. 2. The manufacturer's undertaking is limited to the repair of defective parts or the replacement of these according to the manufacturer's assessment. Costs and risks for transport as well as dismantling and reinstallation of the product / products and other direct or indirect costs, associated with the repair in question, are not covered by this warranty. 3. Periodic inspections, adjustments, maintenance work and changes are not covered by the warranty. 4. Scanmaskin is not liable for any damages to grinding discs or other similar equipment. original components, or incorrect use and installation. 5. The warranty only applies to material and design deficiencies and does not apply in the following cases: a. Damage caused through accidents, carelessness, changes, use of spare parts or grinding tools that are not original components, or incorrect use and installation. b. Damage caused by lightning, water, fire, vandalism, incorrect mains voltage, incorrect ventilation or other causes that lie outside of the manufacturer's control. 6. Scanmaskin reserves the right to modify the design – or make improvements without obligation to change previously manufactured products. 7. All warranty repairs must be carried out by Scanmaskin or by a Scanmaskin authorized repair workshop. Costs for repairs, carried out by an unauthorized workshop, will not be reimbursed by Scanmaskin. If such repairs damage this product these are not cover by the warranty agreement. |