PERMA-WHITE Mold & Mildew-Proof Interior Paint protects itself against the damaging effects of unsightly mold and mildew as it brightens and beautifies ceilings, walls, trim and other related paintable interior surfaces for years. It is specifically designed to withstand the harsh conditions of high-humidity and mildew-prone areas in residential, commercial and Indoor Air Quality (IAQ) remediation environments.
PERMA-WHITE is made from premium latex acrylic resins to produce a washable, blister-proof and stain-resistant finish. It is self-priming and will adhere to any sound surface. It bonds to existing oil base or glossy paints – even Formica® and ceramic tile – without sanding.
PERMA-WHITE also seals flat paint, new drywall, cement block and concrete. It is ideal for bathrooms, basements, locker rooms, laundry rooms, hotel guest rooms, kitchens, closets, etc. - any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mold and mildew growth and cause deterioration of the paint film.
Theoretical Coverage at 1.5 mils:
2 coats are required for proper performance and mold & mildew resistance.
AIRLESS SPRAY EQUIPMENT GUIDELINES
Zinsser Perma-White can be applied with most manufacturers commercial grade electric airless sprayers.
Minimum Sprayer Specifications:
Operating Pressure (PSI): 2,000-2,600
Hose (inches i.d.): 1/4-inch up to 50-feet, 5/16-inch over 50-feet
Spray Tip: 0.017-inch with 8- to 10-inch fan width
Solids by Weight: 57%
Solids by Volume: 41%
Weight (lb./gallon): 11.6
Required Number of Coats: Two
Spread Rate: 4.0 mils WFT per coat, 1.5 mils DFT per coat
Flashpoint (Setaflash): >200° F
Perm Rating: 4.3 (E)
Dry to touch at 70°F: 30 minutes
Dry to recoat at 70°F: 2 hours
Cure Time: 7 to 10 days
Shelf Life: 60 months at 75°F
|Prop 65 Text||Cancer and Reproductive Harm - www.P65Warnings.ca.gov.|
|Approved Use||Mold Remediation, Painting, Water Damage|
|Max Coverage Per Gallon||400|
|pH||8.5 - 9.5|
|Manufacturer Model Number||2770|