Please select a Shopping List

Phoenix Dry Max LGR Dehumidifier Replacement Parts

 Manual/Schematic

View as List Grid

7 Items

per page
  1. Control Board Assembly for DryMAX LGR
    Control Board Assembly for DryMAX LGR
    Control Board Assembly for Phoenix DryMAX LGR Dehumidifier.
  2. Phoenix DryMAX Condensate Pump
    Phoenix DryMAX Condensate Pump

    This Phoenix DryMAX Condensate Pump is commonly used with the Phoenix DryMAX LGR Dehumidifiers (Both Blue and Red variants).

    • Replacement pump for Phoenix DryMax LGR dehu
    • Removes water that is condensed during dehumidification
    • Use second pump if condensate must be pumped more than 20 ft
  3. Claire Penetrating Coil Cleaner, 20 oz
    Claire Penetrating Coil Cleaner, 20 oz

    Penetrating Coil Cleaner features a non-acid, non-chlorinated package that attacks dirt, grime, and soil buildup from evaporator and condenser coils. Its unique delayed foaming action allows for deeper penetration and more thorough cleaning.

    • Expanding dual quat foam for flushing action
    • Pin-point high-pressure jet force tip
    • No rinsing required
    • pH: 11.72–12.7
    • Ready to use

    Starting at $4.16

  4. Lay Flat Ducting, 10 Inch x 250 Feet, 6 mil Thickness
    Lay Flat Ducting, 10 Inch x 250 Feet, 6 mil Thickness

    When you need lay flat ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 10 inches wide when expanded
    • 250 feet in length
    • 6 mil thickness
  5. Hose, 1/4" Dehumidifier Drain
    Hose, 1/4" Dehumidifier Drain
    This condensate pump vinyl drain hose measures 1/4"ID x 33'L.
    • Condensate pump vinyl drain hose
    • Measures 1/4"ID x 33'L
    • Commonly used on Phoenix dehumidifiers
  6. Lay Flat Ducting, 10 Inch x 250 Feet, 2 mil Thickness
    Lay Flat Ducting, 10 Inch x 250 Feet, 2 mil Thickness

    When you need Lay Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 10-inch diameter when expanded
    • 16 inches wide when flat
    • 2 mil thickness
  7. 9" x 12" x  1" MERV 10 Filter for Phoenix Dry Max LGR
    9" x 12" x 1" MERV 10 Filter for Phoenix Dry Max LGR

    This replacement MERV 10 media filter fits the Phoenix Dry Max LGR dehumidifier.

    • MERV 10
    • Measures 9" x 12" x 1"
    • Standard filter for Phoenix Dry Max LGR dehumidifier
View as List Grid

7 Items

per page

Recommended For You