HydraMaster Spitfire 3.2 Truck Mount Replacement Parts
-
Adapter, 2"NPT x 2"F‑Slip2" x 2" adapter, slip fitting to male pipe thread.
- PVC Fitting
- Slip to Male Pipe Thread
- Ships Same Day
-
Barb Elbow, 2"H x 2"FPT 90 Degree
Barb 2 x 2FPT with 90 degree elbow
- PVCI Fitting
- 90° Elbow
- 2" Barb x FPT
-
Gauge, HM Pressure
2-1/2" panel mount gauge 0-1500 psi.
- HydraMaster
- 0-1500PSI
- Black Face
$123.54 -
SaleTrim Lok, 5/8 x 1/8 (Sold per Foot)
Trim Lok 5/8 x 1/8 (Sold per Foot)
- HydraMaster
- Trim Lok
- 5/8' x 1/8"
Regular Price $9.30 Special Price $9.03 -
Briggs & Stratton Voltage Regulator 16A (845907)
Briggs & Stratton/Vanguard 16A voltage regulator.
- Briggs & Stratton/Vanguard
- Voltage Regulator
- For 20HP Engines
$106.95 -
Stainless Steel Chemical Pump (100906)
Stainless steel chemical pump by General Pumps.
- Stainless Steel
- Easily Rebuildable
- Used On A Wide Variety Of Truck Mount Systems
$228.02 -
Comet USA Clutch Hydra2 Pump (8201.0000.00)Belt driven electric clutch by Ogura Manufacturing.
- Comet USA
- 12V Single Groove Clutch
- 24MM Center Bore
- For Use with HydraMaster Boxxer 421 and Spitfire Series
$775.54 -
Briggs & Stratton Exhaust Gasket (000‑057‑146)Briggs & Stratton/Vanguard exhaust gasket.
- Briggs & Stratton/Vanguard
- High Temp Exhaust Gasket
- Square 4 Bolt Pattern
-
Board, HM Temperature ControlTemperature control board for HydraMaster truckmounts.
- HydraMaster
- 170-225°
- For Use with Boxxer, and Spitfire Series. Not for Maxx Series. Use HM-074110-EA for Maxx Series
$298.26 -
Comet USA HydraPump2 (6300.0800.00)Hydra2 water pump for HydraMaster Boxxer and Spitfire truckmounts.
- Comet USA
- Belt Driven Piston Pump
- 3.5 Gallons Per Minute
- Up to 1200 PSI
$1,325.23 -
Ring, HM Coupler RetainerBlower coupler retaining ring.
- HydraMaster
- Blower Coupler Retainer Ring
- Ships Same Day
-
Assembly, HM Protected Recovery FloatProtected recovery tank float assembly.
- HydraMaster
- Recovery Tank Float Assembly
- Pre Universal Tank Design
$188.48 -
Valve, 1‑1/2" Brass Ball1-1/2" Brass ball valve. Typically used as a waste tank dump valve.
- Sturdy Brass Casting
- Stainless Steel Inner Ball
- PTFE Seals
- Rated up to 600PSI
$128.35 -
SaleAssembly, Float ValveFloat valve assembly.
- Complete Assembly
- Brass Body Valve
- Replacement Part
Regular Price $149.06 Special Price $144.72 -
Gauge, HM Vacuum2-1/2" panel mount gauge 0-30"HG
- HydraMaster
- 0-30"HG
- Black Face
$121.51 -
SaleFlow Meter, HydraMaster ChemicalHydraMaster chemical flow meter, 2-10GPM.
- HydraMaster
- 2-10GPM Flow Meter
- Ships Same Day
Regular Price $127.19 Special Price $123.47 -
Dema Engineering High Temp Dump Solenoid (453P‑12V)HydraMaster temperature bypass solenoid.
- HydraMaster
- Temperature Solenoid
- 1200PSI
- 200+°
$207.69 -
Ball‑Valve, 3 Way Chemical Selector
Chemical selector valve has 3-way setting: off, prime, and chemical. Fits most Prochem, BLUEline, HydraMaster and Sapphire Scientific truck mount units.
- Ball-Valve
- 3 Way
- Chemical selector
-
Valve, Chemical Metering
This 1/8" female pipe thread chemical metering valve will fit most Prochem, BLUEline, Sapphire Scientific and HydraMaster units.
- SwageLok Valve
- Needle Valve
- 1/8"
-
SaleCable, Throttle
Throttle Cable.
- Throttle Cable
- Fits older Prochem units with T-handle throttle
- Free Technical Support
Regular Price $167.93 Special Price $152.68 -
Cable, Choke
Choke Cable
- Choke cable
- Fits all Prochem and BLUEline truck mounts with choke
- Free Technical Support Available
-
SaleHose, Winterizing and DescalingTruck mount winterizing and descaling hose kit.
- Winterizing and Descaling Hose
- Provided by Jon-Don
- Free Technical Support
Regular Price $212.75 Special Price $200.70