Metzger/McGuire Edge‑Pro 80, Standard Gray, Part A (5 GL)

Edge-Pro 80 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system that protects joint edges from spalling under material-handling vehicle traffic. This superior joint filler offers some great benefits that will make it your go-to product to fill and protect joints in exposed concrete retail floors and light- to moderate-duty warehouse concrete floors.

Superior Moisture Tolerance - Inherent moisture remaining in a newly placed concrete slab that is less than 30 days old often leads to failed joint repair. Humid environments can also hamper the effectiveness of other products. Edge-Pro 80 is moisture tolerant and offers better adhesion to damp substrates.

<Flusher Finished Profile with Wider Range of Optimal Shave Times - With other products, the optimal shave window is very short—generally 45–90 minutes after placement. With Edge-Pro 80, whether you shave at 30 minutes or 15 hours, you get the same flush profile and no smearing, giving greater flexibility on the job site.

Non-Staining and Colorfast - A common complaint associated with other products is that they often stain the concrete, leaving an unsightly ring behind after the shaving process. Edge-Pro 80’s unique formulation will not stain the concrete, resulting in more attractive repairs and higher customer satisfaction.

When cured, Edge-Pro 80 is a rubber-like solid with a hardness of Shore A 80-81. Is intended for use where final operating temperatures are from -20°F (-29°C) to +120°F (49°C).

This is Part A only. Must combine with Part B CU-EP80B-05.

Limitations: Edge-Pro 80 is not recommended for use under VCT or other non-breathable flooring systems. Edge-Pro 80 is designed for interior use and may not be suitable for outdoor applications due to thermal movement.