Improve Plant Growth and Produce Higher Yields with EnviroBoss!
Controlling humidity in your greenhouse, nursery, or grow area is essential to promoting optimal plant growth. Too little humidity results in dried out foliage and “nutrient burn,” while too much can leave plants susceptible to mold, mildew, and rot. Sub-optimal humidity at different growing stages results in poor nutrient intake, which can affect yield and overall plant quality.
EnviroBoss dehumidifiers are designed to give you complete control over the humidity in your grow area. Digital precision control humidistats allow you to dial in the desired humidity level during critical growth stages.
High-airflow blowers promote good air circulation to aid evaporation, preventing stagnant air and moisture buildup without disturbing plants. The blowers also help to promote cooling, prevent overheating, and prevent moisture damage and disease.
The user friendly digital interface displays inlet and outlet temperature as well as relative humidity (RH) readings. It works the same as your home thermostat—imply set the desired RH% and the dehumidifier will automatically cycle on and off to maintain the target setting.
EnviroBoss dehumidifiers are ideal for use for in-house cultivation, horticulture cultivators, nurseries, greenhouses, grow rooms, and other horticultural environments.
These units also feature built-in automatic pump-outs that enhance the overall efficiency of your grow operation by diverting collected water for re-use.
All EnviroBoss dehumidifiers are covered by a lifetime limited warranty on the housing and 6 years on the refrigeration system.
Which size EnviroBoss dehumidifier is right for your growing operation?
Plants drink in water AND then evaporate water out via leaves. Nearly 100% of water evaporates back into the air. So, if you water with 10 gallons per day, you need to remove at least 10 gallons per day.
What are the optimal growing humidity levels?
Growing experts recommend that you move from the highest humidity during the early growing stages to lower humidity during the mature growth/flowering stages.
|Water Removal (80°F/60% Rh)||10 gal||18 gal||21 gal|
|Water Removal (Max at Saturation)||16 gal||29 gal||30 gal|
|Power (115V)||9.8 amps||9.8 amps||6.2 amps|
|Air Movement||180 CFM||80 CFM||400 CFM|
|Dimensions (H x D x W)||12.5" x 21.5" x 17.6"||33.5" x 20" x 20"||40.5" x 23" x 24"|
|Weight||65 lbs||115 lbs||158 lbs|
|Air Filter||MERV 11||MERV 11||MERV 11|
|Brand||Provided by Jon-Don|
|Water Removal (AHAM)||168 pints|
|Warranty Information||Lifetime from the date of purchase on polyethylene body; Six (6) years from the date of purchase on the compressor and coils; One (1) year from the date of purchase on parts and labor (EXCEPT this warranty does not cover consumable or wear items including, but not limited to, filters, batteries, power cords, belts, cords, switches, valves, hoses, and rubber parts);|