Please select a Shopping List
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Mit‑X DriWrap® Penetrating Mold‑ and Mildew‑Resistant Barrier (5 GL)

Item #
5 Gallon PAIL     Qty: 1
Send to a Friend Add to My Shopping List
  • Breathable barrier
  • Blocks mold-supporting nutrients
  • pH: 8.2
  • Use with a sprayer, roller, or brush
  • Coverage: 250–1,000 sq ft per gallon

We pay the shipping on this product with $350 of qualifying items (Details)


Product Information

It's a totally new approach to barrier coatings!

Prevent Mold and Mildew Growth with this Breathable, Mold- and Mildew-Resistant Coating*

DriWrap is a new class of mold- and mildew-resistant coating that works by restraining nutrients that promote mold and mildew growth from reaching the surface of the materials it's applied to. It essentially cuts off the food source for mold and mildew while still creating a breathable barrier that allows water to evaporate out of wood.


DriWrap contains an EPA-registered preservative to inhibit the growth of mold and mildew on the dry surface coating. Its unique formula penetrates beneath the surface of wood, so even if it is sanded, the benefits of the product remain. It also contains web-like polymers that help prevent the wood from swelling.


DriWrap's formula includes a fluorescent tracer to help ensure full coverage. However, the product will not change the appearance of treated surfaces.


This low-VOC product also has low odors, so it helps to reduce occupant complaints post treatment.


Use DriWrap to treat porous interior surfaces, such as OSB, plywood, other engineered wood products, brick, and wallboard during remediation. Do not over apply to load-bearing I-joists with OSB webbing.


This product can also be used to add protection against future water damage and staining from mold and mildew, helping avoid future mold and mildew mitigation work and improve customer satisfaction.


This economical product is a great choice for a last-step product on every mold mitigation and water damage restoration job. 


*Provides mold and mildew resistance on the dry coating film.






Mold Remediation System

  1. HEPA vacuum surface per ANSI/IICRC S250 Mold Remediation Guidelines.
  2. Apply Mold Stain Remover (RP-MMR-04) per label instructions and allow to dry completely.
  3. Remove loose organic material by HEPA vacuuming surface again.
  4. For extended protection from mold and mildew growth, apply DriWrap to treated surfaces. 


Equipment needed: Airless sprayer, brush, or paint roller. If using an airless sprayer, avoid atomizing the solution by using a tip with no smaller than 0.015 orifice. All surfaces must be treated to provide and mold- and mildew-resistant coating*. Clean out sprayer quickly after application to ensure DriWrap does not bond to the equipment. 


*Provides mold and mildew resistance on the dry coating film.


DriWrap is ready to use. Do not dilute or mix with other products. Stir the product thoroughly before use. DriWrap will not change the appearance of treated surfaces. 


Coverage rates: 250-1000 sq ft per gallon. Coverage varies depending on surface porosity. 



More Information
Prop 65 Text This product can expose you to chemicals including ethylene oxide and 1,4-Dioxane which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to
Category Sealers
Color Clear
Approved Use Mold Remediation
Max Coverage Per Gallon 250 - 1000
Application Mold Remediation
pH 8.2
Condition New
Manufacturer Model Number MX-DW-05
Material Masonry, Wallboard, Wood
Xactimate Code PNT+++ ($1.15 per sq ft)
Safety Data Sheet (SDS)
Related Products

Customers Also Viewed