Chemspec® Kill Odor Plus, Spring Fresh
- For use as a pre-spray, deodorizer, spotter, and more
- Great spring fresh scent
- ph: 6.2–7.2
- Safe for stain-resistant carpets and wool
- Variable dilutions
Product Information
Chemspec Kill Odor Plus combines a unique blend of solvents, anionic surfactants, and a proprietary fragrance to quickly penetrates urine salts and oils, producing an excellent clean without harming carpet fiber or voiding carpet manufacturer warranties. It's even safe for use on stain-resistant and wool carpet!
Here's how this complex 2-in-1 formula does the job:
First, the anionic surfactants in Kill Odor Plus rapidly reduce the surface tension of carpet fiber and hard surface floor coverings, allowing the formula to quickly penetrate into the surface where it can get to work releasing and suspending the oily soils.
Next, the solvents within Kill Odor Plus quickly emulsify all oily soils typically found in traffic lanes and suspend them for easy removal from the floor covering when the rinse step is added.
Lastly, not only does Kill Odor Plus remove tough soiling, but it also combats tough odors. It's not a masking agent, by the way. It bonds to malodors at the molecular level and kills them dead! All that's left behind is a delightful spring fresh fragrance.
Kill Odor Plus is the best choice as a traffic lane pre-conditioner, general-purpose spotter, and urine odor neutralizer. Kill Odor Plus is also an excellent choice for hard surface restroom cleanup. You can use it mop floors and get rid of odors that may have soaked into the pores and crevices of the hard surface.
Recommended application environments:
- Healthcare
- Day care facilities
- Nursing homes
- Education
- Public restrooms
- Residential/homes
- Rental properties
Usage
Dilution:
- For use as a heavy-duty Spot Remover (including old urine) - Do not dilute
- For use as a Spot and Odor Remover (including urine) - Dilute Kill Odor Plus with 4 parts cold water (32 oz Kill Odor Plus to 1 gallon cold water)
- For use as a Traffic Lane Cleaner and Encapsulation Cleaner - Dilute Kill Odor Plus with 10 parts water (12 oz. Kill Odor Plus to 1 gallon water)
- For use in restrooms:
- For restroom restoration - Dilute Kill Odor Plus with 8 parts cold water (16 oz Kill Odor Plus to 1 gallon cold water)
- For daily maintenance - Dilute Kill Odor Plus with 16 parts cold water (8 oz Kill Odor Plus to 1 gallon cold water)
Directions for Use on Carpet:
Spot Removal
- Blot and agitate the spotting solution.
- Allow 5 minutes dwell time, and then extract or rinse with DFC105 mixed with water.
Heavily Soiled Traffic Lanes
- Pre-spray area to be cleaned at a rate of 200 - 400 sq ft per gallon.
- Agitate Kill Odor Plus throroughly into the carpet's pile.
- Allow 10 minutes of dwell time, and then extract with an extractor using hot water and DFC 105 in the machine.
Interim Cleaning - Encapsulation Process
- Pre-spray area to be cleaned at a rate of 1,000 sq ft per gallon.
- Agitate the pre-spray thoroughly into the carpet's pile.
- Allow Kill Odor Plus to dry before vacuuming.
Hot Water Extraction Process
- Pre-spray area to be cleaned at a rate of 1,000 sq ft per gallon.
- Agitate Kill Odor Plus thoroughly into the carpet's pile.
- Allow 10 minutes of dwell time, and then extract with an extractor using hot water and DFC 105 in the machine.
- Hot water extraction should be used a minimum of every fourth (4th) encapsulation cleaning. (More dwell time will be beneficial when strong odors are present.)
Directions for Use in Restrooms:
Restoration:
- Mop tile and grout liberally, especially around urinals and toilets.
- Allow 10 minutes dwell time, and then scrub the floor paying particular attention to the areas under and around the urinals and toilets.
- Rinse the floor using a clean damp mop and fresh cold water.
- Allow the floor to dry before putting the restroom back into service. (More dwell time will be beneficial when strong odors are present.)
Daily maintenance:
- Mop tile and grout liberally, especially around urinals and toilets.
- Allow 10 minutes dwell time, and then rinse the floor using a clean damp mop and fresh cold water.
- Allow the floor to dry before putting the restroom back into service.
Specifications
| Brand | Chemspec |
|---|---|
| Application Method | Spray, Wipe/Mop |
| Approved Use | Janitorial Use/General Cleaning, Stain Resistant Carpet |
| Chemical Type | Water Based |
| Product Type | Liquid |
| Scent | Spring Fresh |
| pH | 6.2 - 7.2 |
| Category | Carpet Pre-Sprays (TLC), Deodorizers, Encapsulants, General Odor Control Chemicals, Mohawk Approved, Pet Odor Chemicals, Restroom Odor Control |
| Condition | new |