Please select a Shopping List

AST SOC‑050 “Huskie” Polyurea Pump

Item #
Each    Qty: 1
Send to a Friend Add to My Shopping List
  • High-volume output
  • Two 6-gallon tanks
  • Designed for easy maintenance and operation
  • Variable speed
  • Ratio range 1:1 to 3:1
Availability: Typically in stock (Details)

Product Information

This Durable, Reliable Polyurea Pump Produces a Higher Volume Output than Competing Models!

The SOC-050 is a compact, ultra-durable polyurea pump designed for easy, efficient dispensing of unfilled polyureas, urethanes, and epoxies. It produces a higher volume output than competing models and offers variable speed dispensing.


Accurate, Changeable Ratios

The SOC-050 has a verified ratio accuracy of 99.5%. It offers a ratio range of 1:1 to 1:3, allowing you to select the ratio best suited for the job at hand. It is powered for a 1/2 HP DC drive motor for powerful, reliable, and consistent dispensing.


User-Friendly Design

Designed for single-operator control, the SOC-050 is easy to operate and maintain. It runs off 120V power and draws just 8 amps, so it’s easy to find available power on nearly any job site.


This unit also features finger touch controls with upright operation. It’s not overly complex to use and you won’t have to hunt around to find the power switch.


When the job is done, the system can be conveniently cleaned in as little as 10-minutes.


Rugged, Durable Construction

The AST SOC-050 is built to withstand heavy use in the roughest environments. This ultra-durable unit features 6-gallon tanks as well as stainless steel braided, Teflon-lined hoses. It resists dents, chips, and cracks as well as water damage and chemical corrosion.


Easy Maintenance

Maintaining the AST SOC-050 is easier and less costly than competing models. Its unique design allows the operator to externally lubricate pumps, reducing shut-down time.


The addition of a gearbox increases low-end torque for improved overall efficiency.


The pumps of the AST SOC-050 can be reground, rebuilt, and brought back to tolerance, reducing the need for costly replacements.


THE AST SOC-050 offers a number of other features that make maintenance and operation easy, including individual shut-off valves on the manifold block, locking lids, larger manifold port holds, and replaceable tanks. This unit does not have any right angles in the dispense valve block, which reduces blockages and improves dispensing efficiency.



  • Ratio Range: 1:1 to 3:1
  • Standard Controls: On/Off; variable speed
  • Containers: 6 gallons, each side
  • Motor: 1/2 HP drive, 90 volts
  • Metering Pumps: (2) heavy-duty AST GMP generator™
  • Continuous Output: Up to 0.7 gallons per minute
  • Viscosity Range: 100 CPS to 5,000 CPS
  • Power Required: 120V, 8 amps
  • Applicators: AST handheld, manual dual port manifold
  • Mixer: Disposable, plastic, motionless
  • Hoses: 3/8” x 15’, stainless steel braided, Teflon-lined
  • Frame: 1 1/2” powder-coated tubular steel
  • Dimensions: 32” L x 22” W x 37” H
  • Weight: 150 lbs (empty)


More Information
Brand Provided by Jon-Don
Category Caulk Dispenser
Condition New
Manual / Schematic
Related Products

Customers Also Viewed