Arizona Polymer Flooring Polyurethane 100 VOC, (10 GL Part A, 5 GL Part B)
- For professional use only
- Average coverage rates of 250 to 350 sq ft per gallon
- Excellent resistance to abrasion and chemicals
- Low VOC (100 grams/liter)
- Must order 2 Part A and 1 Part B for full kit
A High-Performance Top Coat for Seamless Flooring Applications
Polyurethane 100 VOC is a two-component, high-solids aliphatic polyurethane formulated to comply with California VOC regulations. It offers a remarkable combination of performance properties not found in other polymer coatings.
Polyurethane 100 VOC produces protective films that are very hard, flexible, and impact-resistant. It offers easy soil release and excellent resistance to a broad range of chemicals. This product is an excellent choice for high-wear areas in need of high abrasion and scratch resistance as well as chemical resistance.
It also offers maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. When used as a finish coat in wall coating systems, anti-graffiti properties are greatly enhanced.
A UV stabilizer package is incorporated into the product to ensure long-term chalk resistance and gloss retention when used in exterior applications.
This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars, and other high-wear areas requiring resistance to fuels and chemicals.
A special accelerator is available when rapid project turnaround is required. Contact your Jon-Don Concrete Sales Representative for more information at 800-400-9473.
Full kit requires 2 Part A and 1 Part B.
|Category||Epoxy and Polymer Flooring Resin|
|Manufacturer Model Number||POLY 100 VOC CLEAR 15GL|