The 3M 7093 Particulate Filter is NIOSH approved for environments containing certain oil- and non-oil-based particles. Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series with 3M Adapter 502, 3M Facepieces 6000 Series, or 3M Facepieces 7000 Series with bayonet filter holders.
When properly fitted, use in a variety of applications, including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.
Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode.
Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).
Before using these filters, you must determine the following:
Time Use Limitations:
Replace cartridge in accordance with an established change schedule or earlier if smell, taste, or irritation from contaminants is detected.