Wall Drying Equipment and Accessories

Wall and Floor Drying Equipment and Accessories

THE INJECTIDRY HP SYSTEM
The Injectidry HP is a positive displacement blower that forces air into or out of wall cavities under positive or negative pressure, drying walls faster than ever before from the inside out! Just drill 3/16” holes every 8” and insert the injectors. You can attain 40+ air exchanges per wall cavity in 60-90 lineal feet of standard wall. It's also terrific for drying beneath cabinets, hardwood flooring, and walls covered with watertight finishes like PVA paints and vinyl coverings.

One unit does the work of 6 or more air movers and draws only 10 amps!

More Info

Each Injectidry comes with a blower unit, plus:

2 rolls of 3/8" x 1/2" x 200' PVC supply tubing
50 Tubing Connectors
50 Tubing Stoppers
2 Small T’s
1 Large Rolling Duffle Bag
1 five foot 2" Main Supply Hose with 1 Quick Connect "T" attached
Pressure Relief Valve

12 – 6 1/2' Sections Of Active Hoseline© with Hose Cuffs connected & ready for use
16 Hose Connectors
10 Quick Connect Inline Manifolds
4 End Cap Plugs
170 Wall Injectors
Manual and instructions

----------Injectidry Accessories----------

The Interceptor HEPA Filter

In-Line HEPA filter for use with the Injectidry

99.97% efficiency HEPA rating!

OE-IHF-EA

The Interceptor is an inline HEPA filtering system for old and new Injectidry systems. During negative drying, the 99.97% efficiency HEPA filter stops mold before it contaminates the air or the equipment. The Interceptor features double gasket seals for complete filter sealing.


VAC-IT Panel System
Completely non-destructive! Reduces labor costs		OE-IVIPP-EA (package of 10 panels)
Injectidry Systems introduces an innovative, non-destructive method for removing water from porous surfaces. The Vac-It Panels simplify set up and significantly reduce labor costs. The 30" x 46" panels are comprised of 8 sections that can be cut into smaller configurations to fit your small space drying needs. Perfect for drying hardwood floors, headers and plaster walls. (to be used with the Injectidry HP system)

Direct-It In Universal Air mover Adapter

Directs air where you need it most!

OE-IDI-EA

This universal air mover adapter allows for the delivery of large amounts of air cost effectively! It dries critical damaged areas such as walls, ceilings and cabinets using any air mover. The Direct-It™ IN allows you to dry up to 22 ft with one air mover and direct air in as many as 17 different areas at one time.

View our selection of Air Movers


\| Home \| \|Air Movers \| \| Air Scrubbers \| \| Moisture Meters \| \| Dehumidifiers \| \| Mold Remediation \| \| Antimicrobials \|