Tramex Water Damage Restoration Master Kit

Item # DA-WDMK51-EA

Each     Qty: 1

Hover Over Image to Zoom
More Views
Tramex Water Damage Restoration Master Kit

Item # DA-WDMK51-EA

Each     Qty: 1

Free Shipping (Details)

Store Pickup Not Available

  • Free Shipping
  • Features Tramex MEP and CMEX II moisture meters
  • Includes pins, probes, and other measurement accessories
  • Protective carrying case included

Product Information

The Tramex Water Damage Restoration Master Kit features the Tramex MEP moisture meter, CMEX II concrete moisture and humidity meter, plus probes, pins, and other accessories for moisture testing in concrete, wood surfaces, and other building materials.


The Tramex MEP is designed for non-invasive testing of wood, drywall, plaster, brick, tiles, resilient flooring, and other surfaces. It offers a wide range of moisture content readings from 5–30%. The MEP takes readings up to 1 1/4" (30 mm) deep without causing damage to the surface. This meter offers three ranges of sensitivity: 1) Wood, Timber/Drywall,  2) Roofing/Plaster, 3) Brick.


The Tramex CMEX II measures up to 6.9% moisture content in concrete. It also offers a convenient hold function, which allows you to freeze the reading when measuring moisture content in an area where the meter face isn't easily seen.


The CMEX II attaches to a relative humidity Hydro-i probe for in situ testing of concrete and ambient conditions, which allows for testing per ASTM F2659 or performing ASTM F2170 (and ASTM F2420 with optional Hood) for relative humidity readings in concrete slabs.


The CMEX II also features an infrared surface thermometer, which takes accurate surface temperature and dew point measurements. When used with the pin-type probe attachment, the CMEX II measures 7–40% moisture content in wood.


The Water Damage Restoration Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.


Kit Includes:

  • MEP - NDT* moisture meter for general building materials
  • CMEX II concrete moisture and humidity meter
  • 3 x Hygro-i ® probes
  • 8 x Hole Liners
  • Heavy-duty pin-type wood probe
  • 7" insulated pins
  • Heavy-duty hammer pin-type wood probe
  • IRTX - Infrared thermometer
  • Calibration Check Salts


Depth of penetration in concrete: (NDT*) approx. ¾" (20mm)
Moisture content for Concrete: (NDT*) 0 to 6.9 %
Comparative for Gypsum floor screed: (NDT*) 0 to 10
Reference scale: (NDT*) 0 to 100
Relative Humidity (Hygro-i ® probe): 0 to 99%
Moisture content for wood (with pin probes):  7 to 40 %
Depth of penetration: (NDT*) 1¼" (30mm) (in wood, drywall)
Moisture content for Wood: (NDT*) 5 to 30 %
Reference scale for building materials: 0 to 100
Size: 16.9" x 13.6" x 5.1"
Weight: 9.72lbs
Power: 3 x 9 volt PP3 Batteries (included)
* NDT - non-destructive test


Brand Tramex
Category Combination/Kit, Moisture Meters, Multi-Function Meter, Non-Penetrating, Penetrating
Condition New