Helping You Make Our World a Cleaner, Safer Place

Ducting - Lay Flat, Vinyl, Metal and Wire Reinforced Maylar

24 Item(s)

List View Grid View

Set Descending Direction

  1. Wire-Reinforced Mylar Flex Ducting

    Starting at: $11.30

    Wire-Reinforced Mylar Flex Ducting

    When you need low cost, non-collapsible ducting for your air scrubber or dehumidifier, this is the choice for you. Use this 25' long wire-reinforced Mylar flex ducting for all intake and exhaust tasks.

    • Available in 6", 8" and 12" diameters
    • 25’ length
    • 160 degree heat rating
  2. Wire-Reinforced Mylar Flex Ducting, 10 Inch x 25 Feet

    Starting at: $14.44

    Wire-Reinforced Mylar Flex Ducting, 10 Inch x 25 Feet

    When you need low cost, non-collapsible ducting for your air scrubber or dehumidifier, this is the choice for you. Use this 25' long wire-reinforced Mylar flex ducting for all intake and exhaust tasks.

    • 10" diameter
    • 25’ length
    • 160 degree heat rating
  3. Wire-Reinforced Mylar Flex Ducting, 14 Inch x 25 Feet (4 PK)

    Wire-Reinforced Mylar Flex Ducting, 14 Inch x 25 Feet (4 PK)

    When your air scrubber or dehumidifier has been engineered with an 10-inch collar, choose this 25’ long x 10” diameter, clear, wire-reinforced mylar flex ducting for all intake and exhaust tasks.

    • 14-inch diameter
    • 25' Length
    • Case of 4
  4. Wire-Reinforced Mylar Flex Ducting, 16 Inch x 25 Feet (4 PK)

    Wire-Reinforced Mylar Flex Ducting, 16 Inch x 25 Feet (4 PK)

    When your air scrubber or dehumidifier has been engineered with an 10-inch collar, choose this 25’ long x 10” diameter, clear, wire-reinforced mylar flex ducting for all intake and exhaust tasks.

    • 16-inch diameter
    • 25' Length
    • Case of 4
  5. Dri-Eaz Duct Ring 12" Vortex Air Mover (04-00042)

    Dri-Eaz Duct Ring 12" Vortex Air Mover (04-00042)

    12" Duct ring for Vortex by Dri-Eaz.
    • Dri-Eaz
    • 12" Duct Ring
    • Vortex Axial Fan
  6. 12" Black Heat Resistant Ducting for Rx12 Heat Systems

    12" Black Heat Resistant Ducting for Rx12 Heat Systems

    Lightweight and retractable, this ducting is designed for maximum air handling capabilities and built for dual direction flow with minimum friction loss. Vinyl and polyester materials with PVC coating make this duct stand up to any rugged environment.  With with the RX12 Heat Drying System.

    • 12" diameter
    • 25' length
    • With separators and clamp
    • Wire reinforced
    • Temperature resistant
  7. Dri-Eaz Collar Outlet Duct (08-00157)

    Dri-Eaz Collar Outlet Duct (08-00157)

    Drizair dehumidifier outlet duct collar

    • Drizair 
    • 1200 2000 2400
    • Outlet Duct Collar
  8. 14-Inch Duct Collar

    14-Inch Duct Collar

    Supplementary 14" duct ring for the Guardian HEPA air scrubber.

  9. Duct Guide Phoenix Guardian

    Duct Guide Phoenix Guardian

    Duct guide for the Guardian HEPA air scrubber.

  10. Lay Flat Ducting, 14 Inch x 250 Feet, 2 Mil Thickness

    Lay Flat Ducting, 14 Inch x 250 Feet, 2 Mil Thickness

    When you need Lay-Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 14-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 14" diameter when expanded
    • 22" wide when flat
    • 2 mil thickness
  11. Lay Flat Ducting, 14 Inch x 250 Feet, 6 Mil Thickness

    Lay Flat Ducting, 14 Inch x 250 Feet, 6 Mil Thickness

    When you need Lay-Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 14-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 14 inches wide when expanded
    • 22 inches wide when flat
    • 6 mil thickness
  12. Lay Flat Ducting, 14 Inches x 250 Feet

    Starting at: $39.44

    Lay Flat Ducting, 14 Inches x 250 Feet

    When you need Lay-Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 14-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 14” diameter when expanded
    • 22” wide when flat
    • Available in either 2-mil or 6-mil thickness
  13. Lay Flat Ducting, 10 Inch x 250 Feet, 6 Mil Thickness

    Lay Flat Ducting, 10 Inch x 250 Feet, 6 Mil Thickness

    When you need lay flat ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 14 inches wide when expanded
    • 22 inches wide when flat
    • 6 mil thickness
  14. Lay Flat Ducting, 10 Inch x 250 Feet, 2 Mil Thickness

    Lay Flat Ducting, 10 Inch x 250 Feet, 2 Mil Thickness

    When you need Lay Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 10-inch diameter when expanded
    • 16 inches wide when flat
    • 2 mil thickness
  15. Lay Flat Ducting, 20 Inch x 250 Feet, 6 Mil Thickness

    Lay Flat Ducting, 20 Inch x 250 Feet, 6 Mil Thickness

    When you require lay-flat ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul.

    • 20-inch diameter when expanded
    • 32 inches wide when flat
    • 6 mil thickness
  16. Bag-A-Duct

    Starting at: $170.00

    Bag-A-Duct

    Use flexible ducting to ventilate small, confined areas that fans cannot reach. Cheap ducting won't last long, and you may end up paying more in the long run.

    • Various diameter
    • Comes with built-in storage bag
    • Works in temperatures ranging from -20º to 185º
  17. Black Heat Resistant Ducting, 25-Foot Length

    Starting at: $390.00

    Black Heat Resistant Ducting, 25-Foot Length

    Lightweight and retractable, this ducting is designed for maximum air handling capabilities and built for dual direction flow with minimum friction loss. Vinyl and polyester materials with PVC coating make this duct stand up to any rugged environment.

    • Available in 12” or 16” diameters
    • Wire reinforced
    • Temperature resistant
  18. Vinyl Ducting, Yellow, 12 Inch

    Starting at: $189.67

    Vinyl Ducting, Yellow, 12 Inch

    This heavy-duty collapsible duct expands your drying options and delivers high-volume airflow anywhere you need it. Available in either 15’ or 25’ lengths. Fits standard 12-inch collars.

    • Collapsible for easy storage
    • Creates either positive or negative pressure
    • Ideal for pushing or pulling air from attics
    • Available in 15' and 25' lengths
  19. Vinyl Ducting, Yellow, 12 Inch x 25 Foot

    Vinyl Ducting, Yellow, 12 Inch x 25 Foot

    This heavy-duty collapsible duct expands your drying options and delivers high-volume airflow anywhere you need it. Available in either 15’ or 25’ lengths. Fits standard 12-inch collars

    • Collapsible for easy storage
    • Lets you create either positive or negative pressure
    • Great choice for when you need to push or pull air from attics
  20. Metalized Flex Duct

    Starting at: $67.60

    Metalized Flex Duct

    Use this un-insulated metalized polyester ducting for both intake and exhaust functions for air scrubbers and dehumidifiers.

    • Use for both intake and exhaust
    • Available in 12” and 18” diameters
  21. Phoenix Window Adapter

    Phoenix Window Adapter

    The Phoenix Window Adapter adapts to most double hung and sliding windows, acting as a portal without the use of plywood or cardboard! It makes properly ducting drying equipment outside the affected structure incredibly easy.

    • Easy way to duct drying equipment outside a structure
    • Adapts to most double hung and sliding windows
    • Eliminates the need for plywood or cardboard
  22. Locking Clamps

    Starting at: $33.17

    Locking Clamps

    Choose these locking clamps when your job requires securely attaching ducting to air scrubbers, negative air machines, and dehumidifiers.

    • Available for 8”, 10”, or 12” collars
  23. Viking D-Ring Lay-Flat Duct Connectors

    Starting at: $60.69

    Viking D-Ring Lay-Flat Duct Connectors

    D-ring is the fastest and easiest way to make lay-flat duct connections. The D-ring provides the greatest airflow of any method now in use. Ducts can be connected by one in just seconds. Best of all, they are reusable.

    • Available in 4 sizes
    • No more leaking seals from hog rings
    • Reusable
  24. Ring, Dry Air 12" Duct

    Ring, Dry Air 12" Duct

    12" Duct ring for
    • Vane Axial Fan
    • 12" Duct Ring

24 Item(s)

List View Grid View

Set Descending Direction