Concrete Surface Prep & PCD Diamond Tooling

List View Grid View

Set Descending Direction

1-24 of 29

Page
  1. 1
  2. 2

  1. Scanmaskin Bush Hammer Surface Prep Tool (3 PK)

    The Bush Hammer Surface Prep Tool features knobbed metal rollers that effectively break down coatings that standard diamonds can’t touch. This tool will create a slip-resistant finish on natural stones, such as marble and granite.

    • Creates slip-resistant finish on granite and marble
    • Breaks down coatings standard diamonds can't touch
    • Prepares surface for application of thin-set overlay
    • Provides CSP 3 to CSP 7 profile
    $4,410.00
  2. Scanmaskin Tiger Gold PCD Diamond Tooling

    Tiger Gold PCD Diamond Tooling is an aggressive diamond tool used for the removal of thick coatings up to 7 mm thick.

    • Single PCD segment
    • Designed for aggressive grinding
    • Used for coating removal up to 7 mm thick

    Starting at: $208.33

  3. Scanmaskin Twin Tiger PCD Diamond Tooling

    Scanmaskin Twin Tiger PCD Diamond Tooling is an extremely aggressive tool designed to work with large Scan Combiflex floor grinders. This high-performance tool was developed to scrub off up to 7 mm of stubborn, thick coatings.

    • Extremely aggressive PCD tooling
    • Use for the removal of coatings up to 7 mm thick
    • Works with large Scan Combiflex floor grinders

    Starting at: $256.66

  4. Scanmaskin Tiger Silver PCD Diamond Tooling

    Tiger Silver PCD Diamond Tooling is an aggressive diamond tool used for the removal of coatings up to 4 mm thick, including black mastic.

    • Aggressive PCD diamond tooling
    • For coating removal up to 4 mm thick
    • Ideal for black mastic removal

    Starting at: $208.33

  5. Replacement 8-Way Square Carbide Scrapers (9 PK)

    Made from premium-quality tungsten carbide, these 8-way square scrapers are designed to ensure the best results and longest life for all removal applications. They are ideal for mastic removal and fit all Onfloor and other planetary grinders. 

    • Premium-quality carbide
    • For use with Onfloor and other planetary grinders
    • Use on all 8 edges
    • Ideal for mastic removal
    $99.36
  6. Flait-It 6 Spike Tungsten Carbide Cutter (96 PK)

    These tungsten carbide cutters feature 6 spikes and are ideal for reducing high spots, texturizing, and preparing most asphalt and concrete surfaces prior to coating application, or for creating a final, non-slip finish.

    • Premium-grade, all-purpose cutters
    • Ideal for leveling high spots and surface prep tasks
    • Works with all 8" SMITH and EDCO 8-inch machines
    • Easy to install
    $431.76
  7. Hardened Spacer for 8-Inch Scarifier Drum, 1/2" (174 PK)

    This hardened spacer fits all 8" SMITH and EDCO scarifier drums. It's easy to install and provides reliable performance.

    • Standard set of spacers for 8" scarifier drum
    • Works with SMITH and EDCO units
    • Easy to install
    $53.94
  8. Scanmaskin RoundOn Tiger PCD Tool

    The Scanmaskin RoundOn Tiger Tool features two segments. It is ideal for removing coatings and black mastic up to 4 mil thick.

    • Economy PCD removal tool
    • Ideal for removing thin coatings and black mastic
    • Two segments
    $80.00
  9. Scanmaskin RoundOn Crush PCD Diamond Tool

    Featuring PCD chips mounted in two diamond segments, Scanmaskin RoundOn Crush is designed for efficient and aggressive removal of thin coatings. 

    • Economy PCD removal tool
    • Two diamond segments
    • Great for removing thin coatings
    • Aggressive performance
    $80.00
  10. Scanmaskin Razorback Silver PCD Diamond Tooling

    The Razorback will remove thin (up to 3 mm) coatings, such as paint, flake flooring, glue residue, and carpet residues, PLUS it grinds the floor at the same time!

    • High quality PCD and diamond removal tool
    • For removal of thin coatings and quartz epoxy systems up to 3 mm thick
    • Removes coatings and grinds surface in one step
    $121.11
  11. Scanmaskin Bauta Crush PCD Diamond Tooling

    Scanmaskin Bauta Crush PCD Diamond tooling contains large PCD chips that are very efficient and aggressive when removing thin coatings. These double-segment tools are compatible with any Scanmaskin Scan Combiflex floor grinder.

    • Double segment tool with PCD chips
    • Ideal for removal of thin coatings
    • Works with any Scanmaskin grinder
    $147.78
  12. Scanmaskin Piranha Coating Removal Tool

    Need to remove thin coatings from concrete? The Piranha is the ideal tool for removing thinner coatings (up to 3 mm) as well as paint flake, glue residues, or carpet residues from concrete or stone surfaces.

    • Can be used to remove thinner coatings (up to 3 mm)
    • Great for removing thin glue and adhesive residues
    • Will also remove paint flake
    $170.56
  13. PCD Diamond Tooling, 2 Quarter Round with Sacrificial Bar

    For removing medium to heavy coatings on concrete floors, this 2 Quarter Round PCD Tooling is ideal. It aggressively scrapes the thickest of coatings, and then follows with a conventional grind—all in one pass.

    • Designed for medium to heavy coating removal
    • Fits Redi Lock and Pro-Maxx conversion plates
    • Available in either left- or right-spinning versions

    Starting at: $79.00

  14. Mastic Master PCD Diamond Tooling, Left Hand

    Mastic Master PCD Diamond Tooling quickly and effectively removes adhesives, glue, and carpet and tile mastic from concrete without leaving deep gouges. Each tool features two carbide squares with PCD chips in the corners, which do a great job of cutting right through tough adhesive material.

    • Left-spinning
    • Carbide squares with PCD chips in the corners
    • Removes tough adhesives, glue, and mastic material
    • Won't gouge floors like traditional PCD tooling
    • Fits Scanmaskin plates
    $128.99
  15. PCD Diamond Tooling, 2 Quarter Round without Sacrificial Bar
    This 2 Quarter Round PCD Tooling is ideal for removing heavy coatings on concrete floors. The PCD is designed and positioned without a wear bar. It scrapes off the thickest of coatings, getting the job done in a fraction of the time.
    • Removes the heaviest coatings
    • available in left- and right-spinning options
    • Without sacrificial bar

    Starting at: $80.00

  16. 3" PCD Puck Half Round PCD with Two #18 Grit Segments
    This is a 3" PCD puck with two half-inch round PCD segments and two #18 grit hard bond stabilizer segments.
    • "Mining-Grade" PCD
    • Available in either left- or right-handed versions
    • Great for coating removal

    Starting at: $151.00

  17. Diamabrush Concrete Prep Tool, 19 Inch (921901202)

    The Diamabrush Concrete Prep Tool features a diamond grit that is bonded to a metallic backing and assembled to a flexible, spring-steel blade. The flexible blade allows the diamond to remain in constant contact with the floor, regardless of floor imperfections, maximizing the effectiveness of the tool.

    • Attaches easily to floor machines and auto scrubbers
    • Easily abrades concrete surfaces
    • Flexible blades keep tool in contact with floor at all times
    • 19-inch diameter
    • 25 grit
    $546.40
  18. Diamabrush Mastic Removal Tool, 17 Inch

    The Diamabrush Mastic Removal Tool features diamond-coated blades that grind down through tough coatings on concrete, including mastic, adhesive, and thinset. No chemicals or heavy machinery is needed. You can use this tool with any standard swing machine, floor buffer, or auto scrubber.

    • Removes stubborn coatings without the use of chemicals 
    • Mountable to any standard 17-inch floor buffer or auto-scrubber
    • 25 grit diamond tool
    • Wearable diamond substrate maintains sharp edge
    $456.40
  19. Diamabrush Concrete Prep Tool, 17 Inch

    Are your concrete floors in need of a little TLC? The Diamabrush patented metallic blade is the first of six steps to a rejuvenated concrete floor.

    • Attaches easily to floor machines and auto scrubbers
    • Easily abrades concrete surfaces
    • Flexible blades keep tool in contact with floor at all times
    • 17 inch diameter
    • 25 grit
    $594.30
  20. LAVINA QuickChange Trapezoid Pads with PCD and Sacrificial Bars
    LAVINA Quick Change Trapezoid Pads have 2 PCD segments and 2 sacrificial bars. They are an excellent solution for thin coating removal.
    • Excellent for thin coating removal
    • Available in standard and left rotation
    • 2 PCD segments and 2 sacrificial bars

    Starting at: $99.00

  21. Trapezoid Pad with PCD and Sacrificial Bar
    Trapezoid Pads have 2 PCD segments and 1 sacrificial bar. These tools are an excellent choice for thin coating removal.
    • Excellent for thin coating removal
    • Standard rotation
    • 2 PCD segments and 1 sacrificial bar
    • Fits Lavina S style plates
    $90.00
  22. QuickChange PCD LH

    These Quick Change PCD (polycrystalline diamond) removal wings are good for removal of thick coatings, epoxy, urethane & other membranes. Very aggressive. For use on Planetary Machines.

    • Light to medium coating removal
    • Use with Onfloor machines
    • Use with Quick Change plates
    $151.00
  23. Diamabrush Replacement Polymer Blades, 25 Grit (5 PK)
    These 25-grit replacement polymer blades fit the Malish Diamabrush Concrete Polishing Tool. Sold in a package of 5.
    • Replacement blades only
    • 25 grit
    • Fits the 17" Malish Diamabrush Concrete Polishing Tool
    • Package of 5
    $181.14
  24. Diamabrush Replacement Polymer Blades, 1000 Grit (44 PK)
    Malish Diamabrush Replacement Polymer Blades Only, 1000 Grit, Pkg of 44
    • For Malish Diamabrush Concrete Polishing Tool
    • Step 5
    • Red
    $693.00

List View Grid View

Set Descending Direction

1-24 of 29

Page
  1. 1
  2. 2