This 250-foot electric vacuum reel features a manual solution hose reel.$2,018.75
This stainless steel spray bottle holder can store up to three 32-ounce spray bottles or spotting bottles. It mounts virtually anywhere with four screws. 12” long x 3 1/2” wide x 4” tall.
- Holder for both spray and spotting bottles
- Holds up to three 32-ounce bottles
- Mounts virtually anywhere
- Stainless steel construction
Use this aluminum rack to hold your PowerForce Sprayer securely in place while traveling. Not only does it protect the sprayer from damage during transport, it also prevents spills. This bin also features a protective holder for the spray wand.
- Protective holder for inline sprayers
- Keep you equipment safe while protecting from spills
- Protective spray wand holder included
- Aluminum construction
Prevent damage to both sprayers and other equipment while your van is in motion with this sturdy aluminum rack. This bin holds two 2-gallon or 3-gallon pump-up sprayers.
- Bin holds two 2- or 3-gallon pump-up sprayers
- Prevents damage to sprayers
- Aluminum rack
This heavy-duty truck mount stair tool from Prochem is just the thing to help you make quick work of any job with stairs. The exclusive Velvet Touch valve assembly is easy on your hands and the adjustable grip lets you apply extra pressure when needed.
- Streamlined design eliminates whistles
- Custom-made valve will handle up to 800 PSI
- Stair tool has two open, 1/8" 80015 stainless steel v-jet
- Fits 2" hose cuff; 1 1/2" version available upon request
- Comes standard with 1/4" male coupler
The Prochem Everest HP650 Truck Mount provides outstanding vacuum pull for water damage restoration and/or dual-wand operation. Improved with an intelligent idle-down system, e-idle™. This system senses when the machine is not in use and automatically idles down the engine to save fuel and reduce noise.
- Outstanding vacuum for restoration and dual-wand operation
- Plug-in floodlight - you can keep working even without power
- Easily diagnose cause of shutdown
- e-idle technology
- Helps reduce downtime
Prevents moisture from dripping out of your truck mount and on to the van floor, causing premature rusting. The pan is designed to fit under the console of your Prochem unit. Stainless steel to prevent rust and corrosion.
- Stainless Steel
- Must be installed under truck mount
These sprayers are designed with a fan tip for optimum coverage during application. The sprayer's solvent-resistant viton seals and heavy-duty, chemical-resistant poly tank make this a top-of-the-line product pick.
- Holds 2 gallons
- Fan tip designed for maximum coverage during application
- Solvent-resistant seals
- Chemical-resistant tank
The PowerForce Dial-a-Mix allows you to dispense the exact amount of chemicals you need to clean heavy traffic areas with no guesswork.
- Dial-up dilution ratio
- Designed for high pressures of truck mount units
- Apply hot, ready-to-use TLC
- 5-quart container
100 gallon capacity
- 100 Gallon Capacity
- Heavy-Duty Rotationally Molded Plastic
- Built-In Chemical Shelf
- Molding Baffles
- Auto Fill Shutoff
- 18"W x 36"H x 61"L
The FREIJE Electronic Descaler is an electronic solution to the challenge of scale-prone hard water. This unique 12-volt technology provides a convenient and powerful electronic treatment of scale-prone water and puts an end to the headaches caused by scaling in your truck mount operation. The high-frequency currents scour pipes to suspend hard water minerals and prevent them from clogging pipes.
- Suspends hard water mineral deposits
- Uses high frequency currents; no salt
- Ideal for truck mounts
24 gauge stainless steel snap block holders are designed to mount inside van doors, on walls, etc. Holds four sheets of standard blocks, keeping blocks handy and trucks neat and organized. 13” high x 12 1/2” wide x 4 1/2” deep.
- Holds four sheets of standard blocks
- Keeps blocks handy, neat and organized
- Mounts on van doors or walls
- 24 gauge stainless steel
Use the Grandi Groom to agitate pre-sprays with ease, allowing the chemical to reach soils and dissolve them prior to extraction. It's also great for grooming carpet after cleaning to promote a better appearance and faster drying.
- Ideal for agitating pre-spray into carpet
- Excellent for working protector into carpet fiber
- 18-inch-wide head
- Complete with handle and head
This high-pressure hose reel kit makes your deluxe pressure reel LIVE! Water is transferred from the machine straight to the reel, then on to your wand. This kit contains the following: (1) 1/4” x 3/8” hex nipple, (1) male coupler, (1) 3/8” high pressure swivel stainless steel, (1) high-pressure hose with 3/8” male x 1/4” male swivel ends, (1) female coupler with hex nipple.
- Makes your deluxe pressure reel live
- Aids in faster setup times
- Comes in 6-, 13- and 20-foot lengths to fit any truck mount set
Starting at: $112.94