You get free shipping on this item!
How can I get free shipping on this item?
Got a big commercial job or outdoor project with limited access to power?
Get the Scan Combiflex 800P
Powerful grinding that's 100% fueled by propane!
The Scan Combiflex 800 Propane model is 100% powered by propane and requires no external electrical power. This heavy-duty grinder is designed for high productivity in large areas, both indoors and outside, where power options are limited.
Its heavy weight combined with high horsepower enables this floor grinder to deliver high productivity rates. So it’s perfect for big commercial jobs on tight schedules.
When it comes to using the machine, the controls couldn’t be simpler. This unit features an ignition key and lever to engage the clutch to start the machine, and the red button to stop it.
The unit also features an emergency stop button as an extra precaution. The emergency stop button will remain depressed until the operator turns it slightly clockwise to pop it out.
Simple twist knobs control the direction and speed of the spinning heads. You can easily switch the direction of the grinding heads to ensure longer life and even wearing of your diamond tooling. This maximizes their use and saves money in the long run.
Like all Scan Combiflex floor grinders, the Scan Combiflex 800 Propane features an ergonomic design that focuses the torque of the machine down at the floor where it belongs, not against the operator. Unlike other grinders that make you feel like you’re fighting a bucking bronco, the Scan Combiflex 800 Propane has very little side torque and vibration. You can push the machine along almost as easily as you would a shopping cart.
Plus, the 3-head planetary system holds up to 18 tools. Unlike other systems that require a screwdriver, Allen wrench, and hours of struggle to attach tooling, the Scan Combiflex 800P lets you easily tap on and tap off your tools.
The model also features a built-in 6-gallon water tank, making it easy to perform wet-grinding on jobs where power and access to a hose line may be limited.
The Scan Combiflex 800 Propane is engineered to deliver consistent results with minimal operator effort.
- Productivity Rates: 900-1,550 sq ft/hour
- Propane Tank: 20 lbs
- Grinding Path: 32 inches
- Motor: 25 HP/ 18.5 kW
- Motor Type: Planetary drive system
- Speed: 550-960 RPM
- Tools: Holds up to 18
- Grinding Discs: 3 x 9.5 in
- Water Valve Inlet: Standard
- Water Tank: 6 gallon
- Weight: 970 lbs
- Removal of multiple, heavy floor layers, including paint, carpet residues, adhesive, etc.
- Wet or dry grinding and polishing concrete, terrazzo, and natural stone
- Large commercial and industrial jobs
- Indoor and outdoor applications
RPMs 500 - 1400 Width 32 Brand Scanmaskin Condition New Diameter (in.) 32 Powered By Propane Horsepower 25 Category Floor Grinders Operating Speeds Variable Warranty Information This product from Scanmaskin Sweden AB comes with a twelve month warranty. If the product does not function satisfactorily during this period, Scanmaskin will return the product to full working order for normal use which the product is intended for – with no charge for labor or spare parts, according to the following conditions: 1. The warranty only applies to persons that have legal right to the equipment during the warranty period. 5. The warranty only applies to material and design deficiencies and does not apply in the following cases: a. Damage caused through accidents, carelessness, changes, use of spare parts or grinding tools that are not 2. The manufacturer's undertaking is limited to the repair of defective parts or the replacement of these according to the manufacturer's assessment. Costs and risks for transport as well as dismantling and reinstallation of the product / products and other direct or indirect costs, associated with the repair in question, are not covered by this warranty. 3. Periodic inspections, adjustments, maintenance work and changes are not covered by the warranty. 4. Scanmaskin is not liable for any damages to grinding discs or other similar equipment. original components, or incorrect use and installation. b. Damage caused by lightning, water, fire, vandalism, incorrect mains voltage, incorrect ventilation or other causes that lie outside of the manufacturer's control. 6. Scanmaskin reserves the right to modify the design – or make improvements without obligation to change previously manufactured products. 7. All warranty repairs must be carried out by Scanmaskin or by a Scanmaskin authorized repair workshop. Costs for repairs, carried out by an unauthorized workshop, will not be reimbursed by Scanmaskin. If such repairs damage this product these are not cover by the warranty agreement.
- Related Products
Customers Also Viewed