Unitex® Ready Hard Surface Cleaner

Hover Over Image to Zoom
Unitex® Ready Hard Surface Cleaner
  • Designed to remove the worst soap scum
  • Great for removing ice melt residue
  • pH: 13.0
  • For use on hard flooring
  • Various dilutions
Product Name Price Qty

Unitex® Ready Hard Surface Cleaner (1 GL)

Item # UN-RHSC-01

Size: Gallon    Qty: 1

Add to My Shopping List

Price: $13.06

Sale: $11.69


Unitex® Ready Hard Surface Cleaner (4 GL)

Item # UN-RHSC-04

Size: Gallon    Qty: 4

Add to My Shopping List

Price: $49.74

Sale: $44.52


0
$0.00
Description

Product Information

Unitex Ready Hard Surface Cleaner is a tile cleaner that chemically bonds to hard water residue, soap scum, body oils, and other problematic scum. Professionals agree that this product often requires little to no agitation for superior results.

 

Ready Hard Surface Cleaner is a great choice for shower stalls in health clubs. It also tackles the tough task of removing ice melt that is tracked in during winter months.

 

Ready Hard Surface Cleaner should be applied with a sprayer. It requires at least 5 minutes of dwell time to loosen the soil before you rinse off the product and complete the cleaning job.



Warning: Not for use on marble.

Usage

Usage

Dilution and Usage Instructions:

The use rations given below are approximate. Concentrations may have to be varied according to soiling conditions.

 

  • To remove detergent residue, soap film, hard water salts, and floor finish residue after stripping, use 4 ounces per gallon of water.

 

  •  For removal of ice melt compound residue, use 4 ounces per gallon of water. Damp mop floor with solution and let dry.

 

  • For general cleaning of stainless steel, formica, etc., use a starting point of 4 ounces per gallon of water. Apply to surface with a sponge or cloth. Rinse with water if necessary.

 

  • For use on masonry surfaces, use 8 ounces per gallon of water. Machine scrub with proper pad, pick up solution, and rinse with clean water.

 

  • For initial cleanup of washroom and shower areas with heavy accumulation of soap scum and hard water residue, mix at a ratio of 1 to 1.

 

  • For normal maintenance, use 8 per gallon of water. Apply with sponge or sprayer and allow solution to "work" 5 to 10 minutes. Scrub with bristle brush and rinse with clear water.
Specifications

Specifications

Brand Unitex
Category General Purpose Cleaners
Product Type Liquid
Scent Odorless
pH 12.8
Dilution Variable
Material Concrete, Formica, Masonry, Stainless Steel, Stone, Tile, Wood
Application Hard Surfaces/Floors
Application Method Spray, Wipe/Mop
Approved Use Janitorial Use/General Cleaning
Condition new