TurboForce International Raptor Hard Surface Wand Replacement Parts

List View Grid View

Set Descending Direction

14 Item(s)

  1. V-Jet 95015, Stainless Steel, 1/8 Inch
  2. Hex Nipple, 1/4"MPT x 1/4"Flare, Brass
    1/4"M x 1/4"F brass hex nipple.
    • Brass
    • 1/4"M x 1/4"F
    • Connector
    • 48-4B
  3. Spray Gun Only
    This super-duty spray gun allows you to make your own spray wand. It handles up to 4,000 PSI and 300°F and up to 10 gallons per minute. The bottom pivoting trigger allows for low-fatigue use and the special design means heat builds up slowly. Easy to rebuild, too. Sold without a t-jet or quick coupler.
    • Rated up to 4000PSI
    • Rated up to 300°
    • Rated up to 10GPM
  4. Coupler, Male x 1/8" FPT

    Brass Quick Coupler 1/8 inch; Flo Thru.

    • Brass fitting
  5. Coupler, 1/4"FPT x 1/4"MQD SST

    This 1/4" male, stainless steel quick connect fits 1/4-inch hoses.

    • Male connection
    • Durable stainless steel construction
    • Fits 1/4-inch hose
  6. Coupler, 1/4"FPT x 1/4"MQD

    Our most popular male quick disconnect plug! This brass coupler features heavy-duty double O-rings and works in all high-pressure and high-temperature applications.

    • Male connection
    • Double O-rings prevent leaking
    • Brass construction
  7. Coupler, 1/4-Inch FPT x 1/4-Inch FQD SST

    This 1/4-inch female quick coupler is stainless steel and offers double O-rings. Its durable design lasts longer than the competition. Stainless steel construction allows for pressures exceeding 3,000 PSI and solvent resistance.

    • Double O-rings prevent leaking
    • Durable stainless steel construction
    • Withstands 3,000 PSI and solvent chemicals
  8. Coupler, 1/4"FPT x 1/4"FQD

    The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.

    • Double EPDM O-Rings
    • Brass Construction
    • 1/4"
  9. Wand Handle, 1 1/2", Low Profile

    Handle - 1 1/2'''' Low Profile

    • Grip, padded
  10. Snap Ring

    Copper ring for locking vacuum heads.

    • Ring, split copper
  11. Open Flow Coupler, 1/8"F, Brass

    This brass 1/8" open flow female coupler connects to a 1/8" female pipe thread. This high-quality part connects easily and provides long-term, reliable service.

  12. Hex Nipple, 1/4"M x 3/8"M, Brass
    1/4"M x 3/8"M brass hex nipple.
    • Brass
    • 1/4"M x 3/8"M
    • Hex Nipple
    • 122-CB
  13. Hose, Raptor Solution
    Raptor wand high pressure solution hose.
    • TurboForce Intl
    • High Pressure Hose
    • Stainless Steel
  14. Brush, TurboForce Raptor
    TurboForce Raptor brush and bumper.
    • TurboForce International
    • Bumper and Brush
    • For Use with Raptor

List View Grid View

Set Descending Direction

14 Item(s)