Prochem Legend XL Replacement Parts

List View Grid View

Set Descending Direction

1-24 of 65

  1. 1
  2. 2
  3. 3

  1. Kohler Engine 20HP Model# CH640-3058
    ea Kohler Engine 20HP Model# CH640-3058
  2. O-Ring Y-Strainer

    This O-ring is .676 Id x .816 Od. It fits the Y-Strainer for the solution outlet assembly and the bypass manifold assembly for most Prochem and BLUEline units.

  3. Voltage Regulator

    This voltage regulator fits the Kohler engines on the Prochem Legend series and the BLUEline Champ truck mounts

    • Genuine Kohler part
    • Fits 17 HP-26 HP Command series engine models CV and CH
  4. Air Filter Kohler Command

    This Kohler air filter element is made for the following truck mount units: Prochem Legend, Legend SE, and Legend XL fitted with Kohler Command engines. This part does not include a pre-filter.

    • Fits most 17 HP- 26 HP Command series engine models CH and CV
  5. Filter, Pre-Air Kohler

    This pre-air filter has been manufactured to fit the following Kohler Command engine-equipped truck mount units: Prochem Legend, Legend SE and Legend XL.

    • Pre-filter


  6. Starter Kohler

    Kohler Starter

    • Spin-on design
    • Genuine Kohler part
  7. Kohler Oil Filter

    Oil Filter for Legend truck mounts.

    • Dimensions.: 3" W x 2.6" L
    • Spin-on design
    • Genuine Kohler part
    • For use with Legend truck mounts
  8. Chemical Pump Check Valve (42-809265)

    This check valve fits most Prochem stainless steel chemical pumps.

    • Check Valve
    • For Use with Many Prochem and HydraMaster Chemical Pumps
    • Ships Same Day
  9. Chemical Pump Disk (36-003)

    This plastic chemical pump disk works as a diffuser to cushion the diaphragm providing longer life to the diaphragm.

    • Chemical Pump Disk
    • For Round Style Last Step Chemical Injection
  10. Chemical Pump Diaphragm

    Diaphragm for chemical pump used on all Prochem truck mounts and on all non-HP BLUEline truck mounts.

    • Rubber diaphragm
    • For use with Prochem and BLUEline truck mounts
    • For use with select newer Hydramaster units
  11. Cat Pumps 3CP Pump (3CP1140CS.3)

    Cat 3CP1140CS.3 Pump

    • Cat Pumps
    • 3CP1140CS.3
    • 16.5MM Shaft
    • 2200 PSI, 3.6 GPM
  12. 12V Fuel Pump (035000-0510)

    Electric 12 VDC fuel pump.

    • Fuel pump
    • 12 volt
    • 2-3 psi
  13. Sensor, Temperature Gauge
    Temperature gauge sensor.
    • Variable Temperature Sensor
    • For Use with Various Styles of Truckmount
    • Free Technical Support
  14. Hour Meter

    Round hour meter used on ALL Prochem and BLUEline truck mounts.

    • Hour meter
  15. Circuit Breaker, 20A

    20-amp, 12-volt circuit breaker is easy to install and resettable.

    • Circuit Breaker
    • 20A
    • Resettable
    • 30-008
  16. O-Ring Check Valve Assembly

    This O-ring goes on the check valve cap and seals the cap to the check valve. Measures 7/8" ID x 1 1/16" OD.

    • O-Ring fits cap on older Prochem brass chemical pumps


  17. Belt, AX39

    This is a water pump belt for the Prochem Performer, Bear and Powervac 2 units.

    • AX39 Belt
    • Fits some Prochem Legend XL, Power vac, vacuum pumps and water pump on Bear, Bear Cat, and Performer truck mounts
  18. Kohler PTO Rear Oil Seal (52 032 08-S)
    ea Kohler Oil Seal PTO Rear oil seal
  19. Kohler Ignition Module (2458445)
  20. Valve, 180 Thermal Relief

    General Pump 180° thermal relief valve.

    • General Pump
    • Thermal Relief
    • 180° Open
  21. TKX Lubricant, 16oz (4KK77)
    Aerosol blower lubricant. For use with all truckmount and blower types.
    • Blower Lubricant
    • Non Drying Oily Film
    • Displaces Moisture
    • Protects Against Corrosion
    • For use with All Vacuum Blower and Truckmount Types 
  22. Stainless Steel Chemical Pump (100906)

    Stainless steel chemical pump by General Pumps.

    • Stainless Steel 
    • Easily Rebuildable 
    • Used On A Wide Variety Of Truck Mount Systems
  23. Kohler Kohler Breather Gasket Kohler #24 041 51-S (24 041 67-S)
    ea Kohler Breather Gasket Kohler #24 041 51-S
  24. Truck Mount Pump Out System

    Featuring a 12VDC motor this diaphragm waste pumpout produces consistent, smooth pulsation to prevent misdirected wastewater flooding. This pump can be run dry for short periods without causing damage to the pump.

    • 0.5HP drive motor
    • Diaphragm pump by COMET USA
    • For use with any truck mount system

List View Grid View

Set Descending Direction

1-24 of 65

  1. 1
  2. 2
  3. 3