Priority Manufacturing Samurai Portable Extractor Replacement Parts
Strain Relief 12 Gauge made from heavy duty plastic.
- Strain Relief
- 12 Guage Cord
- 1/2" Male Thread
- Fits Most Portable Extractors
The most popular vacuum hose we carry, this durable vacuum hose is a real workhorse and maintains its flexibility over time.
- Incredibly durable hose
- 1 1/2 inches x 25 feet
- Blue in color
Our most popular male quick disconnect plug! This brass coupler features heavy-duty double O-rings and works in all high-pressure and high-temperature applications.
- Male connection
- Double O-rings prevent leaking
- Brass construction
This inline solution filter assembly is easy to install and works on most tools with 1/4" fittings. It helps prevent valve wear and clogged jets.
- Brass Housing
- Stainless Steel Filter
- 1/4"M x 1/4"M
- Helps prevent valve wear and clogged jets
Velcro® strap for use with power cords, hoses, wands, and pre-sprayers.
- Velcro® Strap
- Wraps Up to 4-1/4" Diameter
- Join More Than One and Wrap More.
2-1/4" ID float
- Float, Shut off
Rocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.
- Single Throw
- Green Rocker Switch
For use with welded valve bracket
- Replacement Trigger
- For Use with Prochem 2 Jet Wand
Vacuum tank lid ring.
- Vacuum Lid Ring Only
- Countersunk Mounting Holes
ea Gasket Dump Valve for PM-S100-EA$4.07
115V 1.4GPM 120 PSI bypass pump with Viton valves. Pump is equipped with 3/8” NPT Female Ports. 3 Champer diaphragm pump, self priming and capable of running dry.
- Replacement 120 PSI pump
- 115 VAC
- 1.4 GPM
- Bypass pump
- Max temperature 170°F (77°C)
Handle - 1 1/2'''' Low Profile
- Grip, padded
This gasket fits the 5-5/8" vacuum motors.
- For use with 5-5/8" vacuum motors
- Self Adhesive
1-1/2" Drain Valve including the spout and gasket.
- Plastic Drain Valve-1-1/2”
- Includes the Spout and Gasket
New style 4" swivel caster.
- Steel Base
- Non Marking Grey Wheel
Float Screen Cage Slip complete for the older style Century 400 units. Heavy mesh filters with contoured rubber top.$22.70
- Complete Heater
- Easy to install
- Fits Ninja 400 series units
Wand Grip Vinyl 1 1/2"
- Vinyl Grip
- Fits most 1½" Wands
Lint Trap Lid and Ring Assembly 6-1/2” x 5/8” Complete for the Vacuum Tank of the Explorer.
- Lint Trap Lid and Ring Assembly 6-1/2” x 5/8” Complete for the Vacuum Tank of the Explorer
Lint Trap Clear Lid without Ring for the Explorer Solution and Vacuum Tank.
- Lint Trap Clear Lid without Ring for the Explorer Solution and Vacuum Tank
2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.
- 2 stage vacuum motor
- 5-5/8” diameter
- 80” water lift
- Lamb # 116392-00
Mushroom shaped stainless steel filter for solution tank.
- 100 Mesh
- Stainless Steel
- Mushroom Filter
This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.
- High-quality replacement part
- Withstands pressures up to 500 PSI
- Easily rebuildable
115V 1.3GPM 170 PSI ShurFlo pump with Viton check valves. Pump is equipped with 125 PSI demand switch which allows it to be used with low flow rate tools such as upholstery and stair tools. This pump can be used in nearly any application where a 100 PSI pump is currently used.
- Replacement 170 PSI SHURflo pump
- 115 VAC
- 1.3 GPM
- Demand pump
- Max temperature 180°F (82°C)