Prospector 100 Portable Extractor Replacement Parts
Strain Relief 12 Gauge made from heavy duty plastic.
- Strain Relief
- 12 Guage Cord
- 1/2" Male Thread
- Fits Most Portable Extractors
Float/filter assembly for the Prospector Series portable extractors.
- Float and Filter
- 1-1/2" Slip Fitting
- PVC Elbow Comes With Filter
Caster, 3-1/2", non marking wheel.
- Non Marking
- Ball Bearing Swivel
10" x 1-3/4" rear non-marking wheel.
- 10" x 1-3/4"
- Non Marking
- "Xtra Soft"
Corded pigtail wire.
- 14-3 Wire
- 6" Long
- Molded Male Plug End
Prospector hatch and ring assembly
- 6-1/2" Textured Lid with 'T' Handle
- Comes with O-ring and Mounitng Ring
- Works for All Models of Prospector Portable Extractors
Rocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.
- Single Throw
- Green Rocker Switch
The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.
- Double EPDM O-Rings
- Brass Construction
Hose Barb 1.5 MPT x 1.5H
- Hose Barb
- 1-1/2" MPT x 1-1/2" Hose Barb
2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.
- 2 stage vacuum motor
- 5-5/8” diameter
- 80” water lift
- Lamb # 116392-00
Mushroom shaped stainless steel filter for solution tank.
- 100 Mesh
- Stainless Steel
- Mushroom Filter
1-1/2" Drain Valve including the spout and gasket.
- Plastic Drain Valve-1-1/2”
- Includes the Spout and Gasket
This gasket fits the 5-5/8" vacuum motors.
- For use with 5-5/8" vacuum motors
- Self Adhesive
This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.
- High-quality replacement part
- Withstands pressures up to 500 PSI
- Easily rebuildable
25' Extension Cord
- Extension Cord
- 12/3 x 25'
- High Visibility Yellow
115V 1.4GPM 120 PSI bypass pump with Viton valves. Pump is equipped with 3/8” NPT Female Ports. 3 Champer diaphragm pump, self priming and capable of running dry.
- Replacement 120 PSI pump
- 115 VAC
- 1.4 GPM
- Bypass pump
- Max temperature 170°F (77°C)
115V 1.3GPM 170 PSI ShurFlo pump with Viton check valves. Pump is equipped with 125 PSI demand switch which allows it to be used with low flow rate tools such as upholstery and stair tools. This pump can be used in nearly any application where a 100 PSI pump is currently used.
- Replacement 170 PSI SHURflo pump
- 115 VAC
- 1.3 GPM
- Demand pump
- Max temperature 180°F (82°C)