Ultimate 340 Dehumidifier Parts and Filters

List View Grid View

Set Descending Direction

24 Item(s)

  1. Power Cord for Ultimate 340 Dehumidifier

    This is a replacement 20-foot power cord for the Ultimate 340 dehumidifier.

    $28.95
  2. 16" x 20" x 4" MERV-14 Pleated Media Filter

    This filter offers superior construction and is an optional filter upgrade for many Phoenix LGR dehumidifiers.

    • MERV 14, 95% efficiency
    • Listed Size: 16 x 20 x 4 inches
    • Nominal Size: 15.5 x 19.5 x 3.75 inches
    • Optional Filter Upgrade for Most Phoenix Stainless Dehumidifiers
    $95.00
  3. 16" x 20" x 2" Pleated Media Filter
    This filter offers superior construction and comes standard on most Phoenix brand restoration equipment.
    • Listed Size: 16 x 20 x 2 inches
    • Nominal Size: 15.5 x 19.5 x 1.75 inches
    • Standard filter for the Ultimate 340 and most Phoenix Stainless Dehuidifiers

    Starting at: $5.48

  4. Phoenix Condensate Pump (4034496)

    This pre-wired condensate pump by Therma-Stor LLC is designed for use with a selection of the Phoenix line dehumidifiers, including the 200 MAX, 200 HT, 270HTx, as well as the Jon-Don Ultimate 340.

    • Phoenix
    • Pre-wired
    • Condensate Pump
    $147.33
  5. Control Board, Ultimate 340
    Ultimate 340 control board
    • Jon-Don Ultimate 340
    • Control Board
    • Ships Same Day
    $128.90
  6. Assembly, Phoenix Handle
    Phoenix rigid handle assembly.
    • Phoenix
    • Rigid Aluminum Handle Assembly
    • Comes with Plastic End Caps
    $33.93
  7. Relay, 120V 30A
    120VAC 30A relay.
    • Phoenix
    • 120V Relay
    • Ships Same Day
    $9.95
  8. Receptacle, Male Panel Mount
    Male panel mount plug receptacle.
    • 125VAC 15A
    • Recessed for Flush Panel Mounting
    • SA & UL Listed
    $12.57
  9. Assembly, Ultimate 340 Blower
    Ultimate 340 blower assembly.
    • Jon-Don Ultimate 340
    • Draw/Exhaust Blower
    • 115vAC
    $239.32
  10. Foot, 340 Rubber
    Front rubber foot for Ultimate 340 dehumidifier.
    • Jon-Don Ultimate 340
    • Front Rubber Foot
    • Plyable Rubber Adds Traction to Nearly Any Surface
    $3.81
  11. Coupler, Male 1/4" Drain Hose
    These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.
    • 1/4" hose barb
    • Male coupler
    • For use with Jon-Don Ultimate 340 and Phoenix 200Max dehumidifiers
    $1.38
  12. Thermistor, Phoenix

    Phoenix dehumidifier thermistor used on the following units;

    • R175
    • 200HT
    • 270HTX
    • Ultimate 340
    • R340
    • Phoenix
    • Defrost Thermistor
    • Free Technical Support
    $6.62
  13. Wheel, 12" Black Rim Jon-Don® R340
    12" non marking wheel.
    • Jon-Don R340
    • Non Marking Rubber
    • 12" Diameter
    $20.30
  14. Phoenix evaporator coil R-410 (4033925-02)
  15. Knob, Ultimate 340 Humidistat Control
    Knob only for humidistat control
    • Jon-Don
    • Ultimate 340
    • Humidistat Knob
    $3.00
  16. Dehumidifier Adjustable Humidistat (4021469)

    Manual humidistat control.

    • Ultimate 340
    • Phoenix SantaFe
    • Knob Not Included
    $15.48
  17. Wheel, Phoenix 12"
    12" non marking wheel.
    • Phoenix
    • Rubber Wheel
    • 12" Diameter
    $20.88
  18. Hose, 1/4" Dehumidifier Drain
    This condensate pump vinyl drain hose measures 1/4"ID x 33'L.
    • Condensate pump vinyl drain hose
    • Measures 1/4"ID x 33'L
    • Commonly used on Phoenix dehumidifiers
    $14.41
  19. Coupler, Female 1/4" Drain Hose
    These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, female receptacle. It can withstand temperature ranges between -40° and 180°F.
    • 1/4" hose barb
    • Female coupler
    • For use with Jon-Don Ultimate 340 and Phoenix 270HTX/200HT/200Max dehumidifiers
    $3.12
  20. Collar, Phoenix Exhaust

    This exhaust collar fits a selection of Phoenix air scrubbers and dehumidifiers.

    $2.85
  21. Coupler, Male Connector

    Male connector for the drain line assembly for the Phoenix 200, 200 Max, and the Phoenix 300.

    • Coupling insert quick connect (male)
    • Fits .38 tube
    $3.96
  22. Retaining Nut

    Retaining Nut

    • Snap in retaining nut for front covers on most Phoenix dehumidifiers and air scrubbers
    $0.46
  23. Lay Flat Ducting, 14 Inch x 250 Feet, 2 mil Thickness

    When you need Lay-Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 14-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 14" diameter when expanded
    • 22" wide when flat
    • 2 mil thickness
    $62.30
  24. Phoenix Evaporator Coil ULT340 (4034227-02 4021395)

List View Grid View

Set Descending Direction

24 Item(s)