Extech and Flir Meter Parts and Accessories

List View Grid View

Set Descending Direction

11 Item(s)

  1. Moisture Probe for Extech 8-In-1 Meters

    Replacement Moisture Probe for your Extech 8-in-1 Meter

    • Fits Extech 8-in-1 Meters Only
    • MO290
    • MO295
    • MO297
    $69.99
  2. Extension Probe for Extech MO290 8-In-1 Meter
    This insulated probe attachment fits your Extech 8-in-1 Meter. Two pins (insulated) 3 1/4" penetration For use on EIFS, insulation and roofs
    $84.99
  3. Hammer Probe for Select Extech Meters
    The Hammer Electrode has pin-electrodes with insulated shanks so measurements may be taken at the tip, allowing contractors to ascertain various depths in wood and wood structures, such as floors and timber stock.
    • For use with Extech MO290, MO295, and MO297 meters
    • Includes 4 pins
    • Each pin measures to a depth of 1.6”
    $139.99
  4. FLIR MR08 Hammer and Wall Cavity Combo Probe

    Easily perform both hammer probe and wall cavity applications on demand with the FLIR MR08 Wall Cavity Probe Combo. This heavy-duty unit is designed to withstand rough use on water damage restoration jobs.

    • Hammer probe can be angled in all directions
    • Detachable bottom handle can be used as wall cavity probe
    • Comes with four pairs of FLIR's new insulated pins (2", 4", 6")
    • Includes impact plate and shoulder case
    • Compatible with FLIR MR77, MR160, and MR176
    $399.99
  5. FLIR MR06 Wall Cavity Probe

    The MR06 Wall Cavity Probe expands the functionality of your FLIR Moisture Meter by allowing you to easily measure insulation moisture levels within the wall cavity and the inside face of exterior walls.

    • Insulated pins designed for increased durability
    • Rubberized ergonomic grips reduce slippage
    • Detachable cord with durable BNC connection
    • 4" and 6" pins included
    • Impact plate to drive pins through drywall
    $174.99
  6. Pins for Extech Hammer Probe (Slide Hammer) (20 PK)

    Replacement Pins for the Extech Slide Hammer (OE-MO290HP-EA)

    • Fits Extech Slide Hammer
    • Pins are insulated
    • Package of 20 pins
    $84.99
  7. FLIR MR05 Impact Pin Probe

    The FLIR MR05 is an external pin accessory that is compatible with the MR77, MR160, and MR176 FLIR moisture meters. It allows you to test hard-to-measure areas and get thorough and accurate results on rough, uneven surfaces, corners, hardwoods, high-density materials, and more!

    • An external pin accessory for extended reach
    • Metallic impact plate
    • Six additional sets of thick and thin pins
    • 1/4"-20 integrated wrench on the cap to replace pins
    • Compatible with MR77, MR160, and MR176
    $79.99
  8. FLIR Replacement Pins for MR05, Standard, 2 mm Diameter (25 PK)

    These replacement pins fit the FLIR MR05 Impact Pin Probe. They measure 2 mm in diameter and 10 mm in length. These replacement pins are easy to swap out in the field. We recommend keeping a set of spares on hand at every job.

    • 2 mm diameter; 10 mm pin length
    • Durable metal pins
    • Field replaceable
    • Sold in a set of 25
    $99.99
  9. FLIR Replacement Pins for MR05, Wide, 3 mm Diameter (25 PK)

    These replacement pins fit the FLIR MR05 Impact Pin Probe. They measure 3 mm in diameter and 10 mm in length. These replacement pins are easy to swap out in the field. We recommend keeping a set of spares on hand at every job.

    • 3 mm diameter; 10 mm pin length
    • Durable metal pins
    • Field replaceable
    • Sold in a set of 25
    $99.99
  10. FLIR Replacement Pins for MR06, MR07 & MR08

    These insulated 2" pins fit hammer, wall cavity, and combo probes. Made from sandblasted, hardened steel, these durable pins feature abrasion-resistant insulation that extends all the way to the connection to the probe. Small in diameter, these pins cause less surface damage.

    • Fits hammer, wall cavity, and combo probes
    • Single-piece construction resists bending and breaking
    • Smaller diameter pins cause less damage
    • Sandblasted hardened steel
    • Insulated with abrasion-resistant coating

    Starting at: $24.99

  11. FLIR MR10 Protective Case for MR77, MR160 and MR176

    This durable case protects your FLIR MR77, MR160 or MR176 from damage caused by dirt, drops, and rough handling. It also safely and conveniently stows your meter accessories. A concealed zipper design provides enhanced dirt resistance. The resilient nylon carry strap won't fray or tear.

    • Fits meter and accessories
    • Concealed zipper design for dirt resistance
    • Resilient nylon carry strap
    • Fits MR77, MR160 and MR176
    $49.99

List View Grid View

Set Descending Direction

11 Item(s)