Dri-Eaz LGR 2000 Dehumidifier Replacement Parts
This Control Panel Kit is used on the Dri-Eaz Model 1200/2000/2400 dehumidifiers. This is the upgrade kit.$174.48
This replacement 3M Filtrete High Air Flow (HAF) Filter fits the Dri-Eaz LGR 2000 Dehumidifier. It protects the internal components of your equipment without restricting airflow.
- Should replace filter after 3 cleanings
- High air flow (HAF)
- Utilizes an electrostatic charge to pull contaminants from the air
Blower Assembly for Dri-Eaz 2000, 2400, and 2400LGR Dehumidifiers.
- Blower Assembly for Dri-Eaz 2000, 2400, and 2400LGR Dehumidifiers
Dri-Eaz LGR2000 dehumidifier condensate pump.
- Condensate Pump
- For Use with LGR2000
Condensate pump micro switch.
- Drizair Dehumidifiers
- Condensate Pump Micro Switch
These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.
- 1/4" hose barb
- Male coupler
- For use with Jon-Don Ultimate 340 and Phoenix 200Max dehumidifiers
Dri-Eaz 12" wheel.
- Non Marking Wheel
- 12" x 2" x 5/8"
This defrost sensor cable assembly fits the Dri-Eaz Evolution and 1200 dehumidifiers and the DrizAir 2000 and 2400 LGR dehumidifiers.$10.71
Fixed Handle Kit for LGR2000$70.00
This is a 25', 16/3 power cord with a molded 3-prong male plug. This cord could be used in a wide variety of applications, but is typically found on Dri-Eaz equipment that does not use a removable power cord.
- 25 feet long
- 16/3 wire
- Molded 3-prong male plug
Drizair dehumidifier outlet duct collar
- 1200 2000 2400
- Outlet Duct Collar
Clear 40-foot drain hose for dehumidifiers.
- 1/4" ID
- 3/8" OD
- 40 Foot
Quick Connect Body 1/4" Barb for the Dri-Eaz units.
- Female Coupler
- 1/4" Barb for
- Dri-Eaz Dehumidifiers
These rivets hold the high-voltage board onto Dri-Eaz dehumidifiers.$0.88