Ninja Dual 2 or 3 Stage 100-150 PSI Replacement Parts
115V 1.4GPM 120 PSI bypass pump with Viton valves. Pump is equipped with 3/8” NPT Female Ports. 3 Champer diaphragm pump, self priming and capable of running dry.
- Replacement 120 PSI pump
- 115 VAC
- 1.4 GPM
- Bypass pump
- Max temperature 170°F (77°C)
115V 1.3GPM 170 PSI ShurFlo pump with Viton check valves. Pump is equipped with 125 PSI demand switch which allows it to be used with low flow rate tools such as upholstery and stair tools. This pump can be used in nearly any application where a 100 PSI pump is currently used.
- Replacement 170 PSI SHURflo pump
- 115 VAC
- 1.3 GPM
- Demand pump
- Max temperature 180°F (82°C)
1-1/2" Drain Valve including the spout and gasket.
- Plastic Drain Valve-1-1/2”
- Includes the Spout and Gasket
This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.
- High-quality replacement part
- Withstands pressures up to 500 PSI
- Easily rebuildable
Wheel Black Ninja 12"$78.60
100 PSI Pump, ShurFlo model number 8006-812-288.
- Replacement 100 PSI SHURflo pump
- 115 VAC
- 1.3 GPM
- Inlet on right, outlet on left (facing head of pump)
- Max temperature 180 degrees Fahrenheit
Heater for Ninja$575.39
Sensor Heater Relay Kit for Ninja units.$48.56
This 3-stage Ametek 5 5/8” dia 90 CFM 112" H2O lift, 10.6A
- 3-stage; 10.6 amps
- 5 5/8” diameter
- 99 CFM; 112" water lift
- Lamb #116565-13
2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.
- 2 stage vacuum motor
- 5-5/8” diameter
- 80” water lift
- Lamb # 116392-00
This gasket fits the 5-5/8" vacuum motors.
- For use with 5-5/8" vacuum motors
- Self Adhesive
Ninja Classic heater resettable thermostat
- Century 400
- Resettable Thermostat
- For Century Ninja Classic Heater
- 2 prong toggle switch
- 120 volt
Toggle Switch Boot
- Rubber Toggle Switch Boot
This new-style axle is made to fit Ninja portable units manufactured by Century 400 that use the 1 piece axle system.
- Axle 1pc - New Style
- Replacement 100 PSI pressure switch
The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.
- Double EPDM O-Rings
- Brass Construction
Glass Insulator Tube
- Glass Insulator Tube
- For All Models of Sonozaire Units
Mushroom shaped stainless steel filter for solution tank.
- 100 Mesh
- Stainless Steel
- Mushroom Filter
Elbow 1.5 FS x 1.5 FPT
- 1.5 pvc elbow fitting
- Carbon Brush
- Sold Individually
- For Use with Century Ninja
- Easy to install
- Fits Ninja 400 series units
Strain Relief 12 Gauge made from heavy duty plastic.
- Strain Relief
- 12 Guage Cord
- 1/2" Male Thread
- Fits Most Portable Extractors
This 12 gauge 25 ft heavy duty cord is designed for use on Century 400 portable units with heaters.
- Power Cord 12 Gauge