The Injectidry HP60i drying system is the only truly industrial grade system sold today. The internal blower is a Regenerative Blower and many operate 20,000 hours or more trouble free. This translates into more than 10 years of continuous operation. It is not a fan that is typically associated with a portable carpet cleaning machine or shop-vac.
Features and Benefits:
- Use with either positive or negative air flow
- Over 100 CFM
- 60 inches of water lift
- 8 decibles quieter than competing models, and when using the silencer the HP60i is even more quiet
You can even dry wall cavities with mold when using the machine with negative pressure and the available Interceptor In-line HEPA filtering system (sold separately).
Compare this performance with its competitors.
|
Injectors Used |
CFM |
In inches of water lift |
|
Using 60 injectors |
102 CFM |
6.5” |
|
Using 30 injectors |
92 CFM |
24.5” |
|
Using 22 injectors |
85 CFM |
36” |
|
Using 16 injectors |
74 CFM |
48" |
The Injectidry HP60i Wall and Ceiling Package includes the following:
- 1 - HP60 Unit (OE-IDS60B-EA)
- 1 - Main AIR IN - Quick Connects installed at factory (MP-PTFC-EA)
- 1 - Main AIR OUT - Quick Connects installed at factory (MP-PTMA-EA)
- 1 - Carry Bag (OE-IDCB-EA)
- 1 - Rolling Duffle Bag (OE-DB-EA)
- 12 - Active Hoselines - 6’ with 10 air ports each (2 Hosecuffs & 1 QC-Hose Connector) (MP-IDAH3-EA)
- 1 - AIR OUT Main Hose - 6’ with factory-set PRV (MP-AOMH-EA)
- 1 - AIR IN Main Hose - 6’ inline filter, factory-set PRV, & Main QCT (MP-AIMH-EA)
- 10 - Quick Connect - Manifolds (MP-QCM01-EA)
- 3 - Quick Connect - Hose Connectors (MP-IDQCC01-EA)
- 2 - Quick Connect - Small T's (MP-IDQCT01-EA)
- 10 - Hosecuffs (MP-HC3-EA)
- 4 - End Cap Plugs (MP-IDQCEP01-EA)
- 50 - Tubing Connectors (OE-RH07A-EA)
- 50 - Soft Tubing Stoppers (OE-RP1-EA)
- 170 - Wall Injectors (OE-IM06A-EA)
- 1 - 1.5" x 50' Safety Yellow Blank Hose (MP-IDPL03-EA)
- 2 - 3/8" x 200' Safety Yellow Tubing (OE-RH05A-EA)
- 1 - Silencer (OE-IDS60SIL-EA)
- 1 - Manual & CD
- Total System Airflow: 108 CFM
- Static Pressure (Maximum): 60 inches (water lift)
- Weight (blower unit only): 50 lbs
- Air Injector Hole:
- 3/16 inch (wall)
- 1/4 inch (cabinet)
- Capacity: 134 linear feet (using 1 injector every 16”)
- Power Draw (115 Volts): 5.6 amps—11 amps (depending on load)
- Drying Modes: Negatively or Positively
- Warranty:
- 7 year - Housing
- 3 year - Blower
- 1 year Parts – Limited
| Category | Floor and Cavity Drying |
|---|---|
| Brand | Injectidry |
