Bonnet Cleaning

Bonnet cleaning is an interim-maintenance program typically used in commercial cleaning situations. It is considered a low-moisture cleaning system. This process only cleans the face fibers; it does not get the deep down cleaning results from processes such as shampooing and hot water extraction.

Directions – Method 1:

  1. Thoroughly vacuum the carpet.
  2. Using a pump-up sprayer, apply Matrix Brite Look Bonnet Cleaner diluted at 32 oz/gallon of water to the carpet.
  3. Run a bonnet machine or a floor machine with a pad driver and carpet bonnet over the carpet. Flip the bonnet over or replace the bonnet as it becomes soiled.
  4. The bonnet cleaning chemical will become a dry crystal upon drying. This crystal will be vacuumed away during daily maintenance.

Directions – Method 2:

  1. Vacuum the carpet.
  2. Take a carpet bonnet and dunk it into a mop wringer and bucket set filled with Matrix Brite Look Bonnet Cleaner diluted at 32 oz per gallon of water. Wring out the excess chemical.
  3. Run a bonnet machine or a floor machine with a pad driver and pre-soaked carpet bonnet over the carpet. Flip the bonnet over or replace the bonnet as it becomes soiled.
  4. The bonnet cleaning chemical will become a dry crystal upon drying. This crystal will be vacuumed away during daily maintenance.

Warning: Always test material for colorfastness, follow label directions, and never mix product unless specified in the label directions. Each situation reacts differently and results may vary.

List View Grid View

Set Descending Direction

11 Item(s)

List View Grid View

Set Descending Direction

11 Item(s)