FOAM‑iT Pre‑Mix Electric Foam Unit

Get Highly Portable Foaming Power with the FOAM-iT Pre-Mix Self-Contained Unit

The FOAM-iT Electric Foam Unit is a self-contained unit that is powered by a 1.5 HP/120VAC on-board air compressor, which makes it easy to get high-quality foam where compressed air is not available on site. This unit provides up to 6 gallons of foam per minute.

The FOAM-iT includes 6-feet of suction hose – perfect for using chemical in a 5-gallon pail or a 55-gallon drum.

With 25 feet of coiled 1/4-inch dual polyurethane tubing, you can easily move around the job site without having to re-position the unit.

The polypropylene trigger gun wand assembly features a 65-degree nozzle that provides outstanding foam disbursal.

In addition, the air needle valve can be adjusted to control the consistency of the foam produced. Comes with 6-foot electrical cord.

FOAM-iT sprayers utilize unique technology to turn your preferred disinfecting and cleaning solutions* into a rich, clinging foam that adheres to walls, ceilings, and hard-to-clean building components, such as under sill plates and inside wall cavities. Simply put: it’s a superior delivery system for your cleaning/disinfecting products.

The foaming action helps extend surface contact time, which maximizes the chemistry’s effectiveness. It also helps to protect technicians from chemical overspray or drips (such as chemical dripping from a ceiling).

The white foam also makes it easy to see areas that you may have missed, ensuring your cleaning and disinfecting is as thorough as can be.

Includes:

• 6 feet of suction hose
• 25 feet of coiled 1/4-inch dual polyurethane tubing
• Polypropylene trigger gun wand assembly
• 65-degree spray tip
• Santoprene diaphragm pump
• Produces up to 6 gallons of foam per minute
• Powered by 1.5 HP 120VAC on-board compressor
• 6 feet of electrical cord

*Not all products will foam. Products with natural cleaning ability or surfactant formulas will foam. For help on determining if your cleaning product is compatible with FOAM-iT dispensers, contact a Jon-Don Restoration Specialist at 800-556-6366.