The PDS-21 makes drying easier and less frustrating than ever before. It is perfect for under sinks or behind cabinets and permanent furniture. Plus, its portability makes drying a breeze.

• Pressurized air flow
• Heat to 205º
• On-board plug-off system

Injectidry Vac-It Panels simplify the setup process and significantly reduce your labor costs when drying hardwood floors.

• Set of 6 panels
• Each panel measures 30" x 46"
• Use up to 12 panels at a time (with Standard HP60 System)
• Use as a large single port or 5 port panel

Injectidry's Inline HEPA filtering system stops dirt and debris before it contaminates your equipment and the air.

• For use with your Injectidry HP60 System
• 99.97% efficiency HEPA rating
• Features double gasket seals
• For use with negative drying only

The Injectidry HP60FDP Floor Drying Package is designed specifically for floor drying. This setup is extremely quick, easy, and efficient for your typical floor drying needs.

• Capable of drying over 600 sq ft of floors
• Offers extremely quick, easy, and efficient setup
• Can be used with the Interceptor HEPA Filter System
• Carry bag included

The Silencer is made of ABS plastic and quiets the drying system by about 25%. It reduces some of the impeller noise in addition to the air rush sound. Attaches to the 2-inch OUT trunkline and sets up in seconds.

• For use with Injectidry HP60
• Quiets the HP60 Drying System by about 25%

Replacement HP60 base unit with air out and air in main hoses only.

• Base unit only
• Includes main air in and main air out hoses
• Both a positive and negative blower
• Dries over 100 feet of wall cavities
• Compatible with Vac-It Panels for floor drying

Injectidry Vac-It Panels simplify the setup process and significantly reduce your labor costs when drying hardwood floors.

• Set of 9 assorted panels
• Multiple panel sizes for mix-and-match versatility
• Use 12-20 panels at a time

Injectidry Vac-It Panels simplify the setup process and significantly reduce your labor costs when drying hardwood floors.

• Set of 10 panels
• Each panel measures 30" x 46"
• Use up to 20 panels at a time (with Standard HP60 System)
• Cut panels to size to fit your small space drying needs

If you're tired of having Vac-Panels laying all over the place, then this heavy duty nylon carry bag is for you. Capable of carrying 10 Vac-It Panels.

• Can carry 10 Vac-It Panels
• Can be used to carry Rescue Mats
• Also used as an Adaptadry Carry Bag
• Adjustable soft shoulder strap

The Water Separator works to protect your HP 60 blower by preventing bulk water from passing through it when drying in a negative mode.

• For use with the Injectidry HP60 System
• Prevents bulk water from passing through HP60
• For use with negative drying only

Injectidry's high-pressure drying systems are specifically developed to target high risk areas of hidden moisture. The HP60i can be used with Vac-It Panels to quickly dry hardwood floors. Capable of drying over 100 linear feet of wall or ceilings.

• Dries over 100 feet of wall cavities
• Both a positive and negative blower
• Compatible with the Interceptor HEPA Filter System
• Compatible with Vac-It Panels for floor drying

Injectidry's DIRECT-IT IN Axial Adapters are specifically developed to target areas that need high air exchange rates.

• Dries up to 22 feet with one air mover
• Dries up to 17 places at once
• Attaches to any 12, 14, 16, or 18-inch duct ring

Injectidry's DIRECT-IT IN Universal Air Mover Adapters are specifically developed to target areas that need high air exchange rates.

• Dries up to 22 feet with one air mover
• Dries up to 17 places at once
• Attaches to any standard air mover

Dry walls without Damage! The Dri-Eaz® DriForce® InterAir Drying System™ dries almost anywhere: ceilings, behind cabinets, beneath built-ins, insulated walls, firewalls, and vinyl-covered walls. Can be used on positive or negative air pressure.

• Dry up to 90 linear feet of wall
• Averages just 3 amps
• Produces up to 38 inches of static pressure
• Fits in two convenient carrying cases
• Use with Rescue Mat for hardwood floor drying

The WolfPack Floor Drying System from Dri-Eaz connects to the AirWolf air mover and directs airflow down along the floor, drying hardwood floors faster than ever. It easily adapts to any floor plan.

• Dry hardwood floors even faster
• Use in conjunction with AirWolf Air Mover
• Use with a panel system for even faster drying
• Use with a heat system for super fast drying

>Expand your hardwood floor drying capabilities with additional mats for your Dri-Eaz Rescue Mat System. This kit includes two sizes of mats, allowing contractors to set up multiple drying configurations with just one hose connection per mat. Gasket edges provide a powerful seal and eliminate the need for taping down mats.

• Additional panels only
• Package comes with 6 panels total
• Two panel sizes for mix-and-match versatility

The Rescue Mat System from Dri-Eaz enables professional restoration contractors to dry hardwood floors fast. Utilizing the power of a high-pressure blower, such as the DriForce, the Rescue Mat vacuums water vapor right through the surface of the floor.

• Setup is fast and simple with a single hose connection per mat
• Two separate sizes for mix-and-match versatility
• An ideal complement to the AirWolf
• Air Mover not included

The Dri-Eaz TurboVent 48 fits over the snout of your Dri-Eaz Sahara TurboDryer, redirecting the air over a 48-inch-wide column. This handy accessory is ideal for drying wet walls and ceiling cavities and boosts the effectiveness of your drying equipment.

• Dries 48 inches of wall cavities
• Fits any Dri-Eaz Sahara air mover
• Fits LGR2800i or LGR3500i with available VMax Adapter
• Includes TurboVent and Shock Cord with hook ends

The TurboVent InterAir Drying System from Dri-Eaz is a handy air mover accessory that will help you dry difficult areas, such as cabinets, cupboards, and walls. Simply attach it to your Sahara air movers and being ducting air into three different areas at once.

• Dry 3 areas at once
• Fits any Sahara air mover
• Includes carry bag