Dri‑Eaz DriForce InterAir Drying System
- Dry up to 90 linear feet of wall
- Averages just 3 amps
- Produces up to 38 inches of static pressure
- Fits in two convenient carrying cases
- Use with Rescue Mat for hardwood floor drying
Product Information
The Dri-Eaz DriForce InterAir Drying System can be used on positive or negative air pressure and dries almost anywhere: ceilings, behind cabinets, beneath built-ins, insulated walls, firewalls, and vinyl-covered walls.
The DriForce forces high-pressure air into wet walls for wall drying with minimal disruption. You only need to make 1/4-inch holes at the baseboard level to introduce 38 inches of static pressure from the DriForce. It's perfect for hard-to-reach areas like under stairwells, behind cabinets, tubs, etc.
When used in conjunction with the Dri-Eaz Rescue Mat System, the unit can be used to dry hardwood floors and bring them back to their pre-loss condition.
The DriForce blower has a stainless steel base and double-wall polyethylene housing. It is connected to an Air Delivery System (ADS) made of flexible, crushproof polyethylene hose, which is high-temperature resistant and caution-colored for visibility. The ADS attaches to manifolds with convenient slip-on hose cuffs. Up to 12 supply tubes are connected to each manifold and lead to air nozzles that complete the air-delivery system.
The injection-molded plastic air nozzles have a tapered design to improve air delivery and create a tight seal. Fins on each side of the air nozzle allow locking in place with a quarter turn, which is especially important when drying ceilings.
Three advantages of the DriForce are minimal damage, high coverage, and great versatility. The air nozzles create minimal damage because they need only small holes for installation, less than 1/4”, making them easy to hide or repair.
The system provides everything you need to treat over 90 feet of 2 x 4 constructed wall. It is versatile because it can dry many combinations of walls, cabinets, ceilings, headers, etc., in either the injection or extraction mode.
Includes:
- 1 DriForce air mover
- 13 7-foot ADS hoses w/ cuffs
- 8 manifolds
- 1 400-foot coil of PVC tubing
- 100 1/4-in injector nozzles
- 4 manifold end caps
- 5 coupler fittings
- 2 T-fittings
- 25 tube extender connectors
- 1 muffler
- 2 wheeled duffel bags
Dri-Eaz DriForce InterAir Drying System with Airwolf/Wolfpack & Rescue Mats
- The Ultimate Wood Floor Drying System!
Specifications
| Color | Blue |
|---|---|
| Amps | 4.8 |
| Category | Floor and Cavity Drying |
| Brand | Dri-Eaz |
| Condition | new |