List View Grid View

Set Descending Direction

23 Item(s)

  1. Steel Scraper Blades
    These blades are composed of the finest spring steel available on the market. Blades measure 0.094" to 0.096" thick to allow a small flex for the perfect amount of pressure and angle to the floor.
    • CLEARANCE ITEM - LIMITED QUANTITIES AVAILABLE
    • Multiple widths available
    • Blades are 4" deep
    • Blade thickness range of 0.094" to 0.096"

    Starting at: $10.27

  2. Scanmaskin Scan Combiflex 800 Propane Floor Grinder with Water Tank (DEMO/USED)

    Got a large commercial job or big outdoor project with limited access to power? Try the Scan Combiflex 800P. You'll get powerful, productive grinding power that's 100% fueled by propane, plus a built-in 6-gallon water tank. This machine puts all the torque on the floor, not on your hip!

    • Demo/Used Unit - Limited Quantities Available
    • Production rates of 900–1,550 square feet per hour
    • All steel construction
    • Ergonomic and user-friendly controls
    • Designed for high productivity in large areas
    • 6-gallon water tank included
    $18,924.40
  3. Metabo PE12-175 Mini 7" Variable Speed Angle Polisher (DEMO/USED)

    The Metabo PE12-175 is a lightweight, easily maneuverable angle grinder that provides smooth operation and superior polishing performance on multiple surfaces, including concrete, stone, steel, and even automotive parts. It features two-level reduced gears for fine grinding and high gloss polishing.

    • Demo/Used Unit - Limited Quantities Available
    • Lightweight, compact design
    • Ergonomic and low-fatigue for extended grinding
    • Vario Tacho Constamatic (VTC) full-wave electronics
    • Built-in overload protection
    $259.78
  4. SMITH Manufacturing FS150™ Rotary Eraser with Makita Grinder (DEMO/USED)

    The SMITH FS150 is a rugged yet lightweight handheld rotary eraser that cleans up to a 7" removal path. It uses a variety of cutters (steel, tungsten, and diamond) to achieve the desired surface finish. 

    • Demo/Used Unit - Limited Quantities Available
    • Leaves profile for coating applications
    • Unit comes with 10-amp Makita grinder
    • Vacuum port for dust-free removal
    • Lightweight and easy to use
    • Uses a variety of cutters to achieve desired profile finish
    $754.32
  5. Steel Carpet Scraper Blade

    These steel carpet scraper blades feature 1-inch tabs on either side of the blade allowing for easy carpet removal. The razor sharp edge is designed to handle your toughest applications.

    • CLEARANCE ITEM - LIMITED QUANTITIES AVAILABLE
    • 18 inch length
    • 1-inch tabs allow for easy carpet removal
    • Razor sharp edge

    Starting at: $22.22

  6. Ameripolish® Penetrating Agent, 30 oz
    AmeriPolish Penetrating Agent improves dye penetration by delaying the acetone flash from 7-8 seconds to over 30 seconds. This allows dyes more time to penetrate deeper into the surface, which is especially advantageous for extremely hard or dense concrete.
    • CLEARANCE ITEM - LIMITED QUANTITIES AVAILABLE
    • Improves dye penetration
    • Ideal for use on very dense or hard concrete where normal dye will not penetrate
    • Dilute 1 to 4 ounces per gallon of color solution
    $36.83
  7. LAVINA 25G-S Low-Profile Propane Planetary Grinder (DEMO/USED - 95 Hours)

    The Lavina 25G-S propane floor grinder has forced belt-driven planetary movement, so there's no downtime—even if the upper belt breaks. The floating head design allows QuickChange tools to be mounted directly to the heads.

    • Demo/Used Unit - Limited Quantities Available
    • 603 cc, 18 HP motor
    • Propane fueled
    • Works with Superabrasive’s QuickChange tooling
    • Nozzle-free, anti-clogging water spraying system
    $15,173.00 Add to Cart to See Price
  8. LAVINA 13-S Edger, Single Phase, 220V (DEMO/USED)

    The LAVINA 13-S Edger has a grinding path of 13.2" and makes grinding edges a breeze. With features like a level built-in to the head along with an adjustable head makes getting a flat grind on uneven floors easier than ever.

    • Demo/Used Unit - Limited Quantities Available
    • Unique design allows operators to blend edge work and eliminate lines
    • 3 HP, single phase, 220V
    • Built-in level ensures flatness of the floor during work
    • Great for polishing or grinding
    $4,790.00
  9. AST SOC-050 “Huskie” Polyurea Pump (DEMO/USED)

    The SOC-050 is a compact, ultra-durable polyurea pump designed for easy, efficient dispensing of unfilled polyureas, urethanes, and epoxies. It produces a higher volume output than competing models and offers variable speed dispensing.

    • Demo/Used Unit - Limited Quantities Available
    • High-volume output
    • Two 6-gallon stainless steel tanks
    • Designed for easy maintenance and operation
    • Variable speed
    • Ratio range 1:1 to 3:1
    $7,446.25
  10. EZR 22 Twin Handheld Mixer (DEMO/USED)

    The EZR 22 is a dual-paddle mixer that offers two choices for paddle rotation, clockwise and counterclockwise, allowing you to properly mix multiple types of materials. Comes complete with paddles, each measuring 4 3/4" in diameter with an 8 1/4" working width.

    • Demo/Used Unit - Limited Quantities Available
    • Offers two mixing directions
    • Counter-rotating blades reduce counter-torque
    • 10.5 amp / 110 Volt
    • Mix up to 1,200 pounds per hour
    • Comes with paddles
    $696.35
  11. Scanmaskin Scan Combiflex 800 Floor Grinder (DEMO/USED)

    For big commercial projects with lots of paint, coatings, or overlay to remove, the Scan Combiflex 800 from Scanmaskin is the heavy-duty floor grinder you need. It delivers production rates of 750–1,290 square feet per hour. Plus, its unique engineering puts more torque on the floor—not on your hip!

    • Demo/Used Unit - Limited Quantities Available
    • Production rates of 750–1,290 square feet per hour
    • 480V model available
    • All steel construction—right down to the dust shroud
    $17,500.00
  12. Ermator T10000 Three-Phase HEPA Dust Extractor with Distribution Box (DEMO/USED)

    Packed with power and plenty of filter area, the T10000 easily keeps up with the most demanding three-head grinders on the market today. It provides 480 CFM, 120" of water lift, and convenient drop-down Longopac dust disposal. For best results, pair with the Ermator C5500 Pre-Separator.

    • Demo/Used Unit - Limited Quantities Available
    • With distribution box
    • 480V, 16 amps
    • 3 individually tested HEPA filters rated at 99.97% efficiency at 0.3 microns
    • Drop-down Longopac dust disposal system
    $11,175.00
  13. Ermator C5500 Pre-Separator (DEMO/USED)

    Your dust extractor's capacity to handle choking quantities of dust is significantly improved when supplemented with the model C5500 pre-separator. Comes with Longopac dust-free direct disposal.

    • Demo/Used Unit - Limited Quantities Available
    • Increases efficiency of dust collection
    • Separates heavy amounts of dust from air
    • Cyclone filtration system for maximum effectiveness
    • Includes Longopac dust-free drop-down disposal system
    $1,671.20
  14. Scanmaskin Scan Combiflex 18, Single Phase 110V Floor Grinder (DEMO/USED)

    The Scan Combiflex 18 from Scanmaskin is an ultra-tough, all-steel floor grinder that is engineered to put more torque on the floor—not on your hip! This 18-inch machine delivers production rates of around 300–556 square feet per hour while using less than 15 amps.

    • Demo/Used Unit - Limited Quantities Available
    • 18-inch cutting path
    • 110-volt configuration
    • Delivers 300–1,100 RPM
    • Stainless steel dust shroud
    $3,524.82
  15. Blast Pro BRB 2800 Ride-On Floor Scraper (DEMO/USED - 7 HRS)

    This revolutionary machine is designed to tackle the toughest projects and makes removing a wide range of materials faster, easier and more effective than those out of date jack hammers and hand scrapers. This unit has been lightly used for demos and has 7 hours on the engine. It is in like-new condition.

    • Demo/Used Unit - Limited Quantities Available
    • Save on time and labor
    • Removes a variety of floor coatings and toppings
    • Different blade sizes available 
    $40,000.00
  16. LAVINA 13-S Edger, Single Phase, 220V (DEMO/USED)

    The LAVINA 13-S Edger has a grinding path of 13.2" and makes grinding edges a breeze. With features like a level built-in to the head along with an adjustable head makes getting a flat grind on uneven floors easier than ever.

    • Demo/Used Unit - Limited Quantities Available
    • Unique design allows operators to blend edge work and eliminate lines
    • 3 HP, single phase, 220V
    • Built-in level ensures flatness of the floor during work
    • Great for polishing or grinding

    Price: $4,354.11

    Add to Cart to See Price

  17. LAVINA 30L-S (Low Profile) Planetary Grinder, Triple Phase, 230V (DEMO/USED - 179 Hours)

    The 30L-S combines three machines into one, making it a super smart investment. This workhorse is a concrete grinder, polisher, and floor machine all in one. That’s right—after grinding and polishing the floor, you can use this machine for daily maintenance! This unit has 179 hours of use and is in very good condition.

    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Low-profile base reaches beneath cabinets and shelving
    • Three heads and 30” of working area maximize square footage efficiency
    • Heavy-duty model: over 390 lbs of grinding pressure 
    $16,190.00
  18. LAVINA 32-S-HV (High Voltage) Planetary Grinder, Triple Phase, 380-480V (DEMO/USED - 105 Hours)

    The 32-S is the heaviest and most powerful LAVINA floor grinder on the market today. The 32-S has six 9-inch grinding heads that deliver a huge 32” working area.

    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Powerful 20 HP motor, 380/480V
    • Six heads and 32” of working area maximize square footage efficiency
    • Heavy-duty model: over 800 lbs of grinding pressure

    Price: $18,990.00

    Sale: $15,991.58

  19. LAVINA 32-S-HV (High Voltage) Planetary Grinder, Triple Phase, 380-480V (DEMO/USED - 594 Hours)

    The 32-S is the heaviest and most powerful LAVINA floor grinder on the market today. The 32-S has six 9-inch grinding heads that deliver a huge 32” working area.

    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Powerful 20 HP motor, 380/480V
    • Six heads and 32” of working area maximize square footage efficiency
    • Heavy-duty model: over 800 lbs of grinding pressure

    Price: $18,990.00

    Sale: $15,991.58

  20. LAVINA 32-S-HV (High Voltage) Planetary Grinder, Triple Phase, 380-480V (DEMO/USED - 210 Hours)
    The 32-S is the heaviest and most powerful LAVINA floor grinder on the market today. The 32-S has six 9-inch grinding heads that deliver a huge 32” working area.
    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Powerful 20 HP motor, 380/480V
    • Six heads and 32” of working area maximize square footage efficiency
    • Heavy-duty model: over 800 lbs of grinding pressure 

    Price: $18,990.00

    Sale: $15,991.58

  21. Simpla 20 (DEMO/USED)

    The Simpla 20 is an easy to push, brush drive auto scrubber. The excellent maneuverability and great sight lines make this a popular choice for economical floor scrubbing.

    • Demo/Used Unit - Limited Quantities Available
    • 20-inch scrub path
    • Ergonomically designed controls
    • Large rear fill opening
    $3,257.89
  22. Scanmaskin Scan Combiflex 450 Floor Grinder (DEMO/USED)

    For small to mid-size renovation jobs or multiple floor layers, such as tile, adhesive, cutback, underlayment, and grout, the Scan Combiflex 450 is the ideal machine. This unit delivers production rates of 270-430 square feet per hour. This demo/used unit has 179 hours of use and is in very good condition

    • Demo/Used Unit - Limited Quantities Available
    • 18-inch cutting path
    • Production rates of 270-430 square feet per hour
    • Low maintenance design
    • Stainless steel dust shroud
    $3,000.00
  23. Monkey Pads, 7 Inch (5 PK)

    Unlike other diamond polishing pads, Monkey Pads on average achieve a 50% reduction in labor hours in addition to removing the need for harsh chemicals, powder, and additional job site mess. In short, Monkey Pads make you more money!

    • CLEARANCE ITEM - LIMITED QUANTITIES AVAILABLE
    • For use with any 7"  175-300 RPM floor scrubber
    • Easily polish most types of stone
    • Easy to use

    Starting at: $134.33

List View Grid View

Set Descending Direction

23 Item(s)