Need quick, easy finish removal on vinyl tile, vinyl asbestos, terrazzo, quarry tile or marble? Colorless Melt Down removes it all and then finishes fast and efficiently.

• No neutralizing required; non-ammoniated formulation
• pH: 11.8-12.8
• Dilute 32 ounces per gallon of water
• Covers 250 to 500 sq ft per gallon

Get the product that melts finish buildup from baseboards, corners and hard-to-reach areas. This foaming stripper penetrates and lifts away old finish before your eyes. Special valve design allows upside down spraying and prevents clogging.

• Call your local representative for volume deals!
• No-drip foam clings to surfaces
• Inverted position spraying provides accuracy
• Ready to use aerosol
• Strips baseboards of unwanted finish

Sledgehammer Plus not only handles stripping challenges on tough finishes, but it also was designed with a light, fresh scent so you can use it in places where other toxic-smelling strippers can't be applied!

• Call your local representative for volume deals!
• Handles stripping on the toughest surfaces
• pH: 13.0
• Dilute 16 to 32 oz per gallon of water
• Covers 700 to 1,000 sq ft per gallon

This fast-acting floor finish liquifier will solve stripping difficulties caused by frequent high-speed burnishing; super hard, urethane fortified finishes; or excessive buildup.

• Call your local representative for volume deals!
• Will not leave an alkaline residue requiring multiple rinsing
• Liquifies even urethane fortified finishes
• pH: 13.5 - 14.0
• Dilute 13 - 25 ounces per gallon of water

Betco’s Green Earth Floor Stripper's low-odor, no-rinse formula is easy to work with and is perfect for use in all types of facilities including healthcare, retail and education.

• Call your local representative for volume deals!
• Removes "non-zinc" crosslinked floor finishes
• Meets Green Seal requirements
• No added dyes; non-caustic formula
• pH: 10.0-11.0

A high power, fast-acting, low odor, no-rinse floor stripper!

• Call your local representative for volume deals!
• For removing all types of metal-interlocked floor finishes
• Rinse-free formula strips multiple coats of burnished finish
• pH: 11.8–12.8
• Dilute 10-25 ounces per gallon of cool water