KlenzAll Alkaline Cleaner powers through stubborn grease and soils on stone surfaces. Its professional strength, alkaline formula is safe on stone so it will not etch.

• Cleans all natural stone safely
• Powers through stubborn grease and soils
• pH: 11.5-12.5
• Variable dilutions
• Covers 2,000 to 10,000 sq ft per gallon

Restore cleans away hard water deposits, grout haze, efflorescence and soap scum. For use on ceramic and porcelain tile, granite, slate, sandstone, and grout.

• Cleans away hard water deposits, grout haze and soap scum
• Makes tile and grout look new
• pH varies from 1-2.8 with dilution
• Variable dilutions
• Covers 2,000 to 8,000 sq ft per gallon

StoneTech Stone and Tile Cleaner has a gentle formula and neutral pH - perfect for daily cleaning.

• Gentle formula perfect for daily cleaning
• Great for ceramic and porcelain tile and all natural stone
• pH: 6.0-7.0
• Dilute 2 to 4 ounces per gallon of water
• Covers 15,000 to 30,000 sq ft per gallon

Used for removing sealer, wax, varnish, epoxy, polyurethane, and acrylic from natural stone and masonry.

• Removes tough coatings, lacquers, and varnishes
• Epoxy grout haze remover
• Low odor and non-flammable, water-based formula
• Professional strength

This continuous flow aerosol can makes it easy to seal grout on floors, countertops, and even walls. For use on grout on all natural stone, ceramic, and porcelain tile.

• Apply as little as two hours after grouting
• Keeps grout looking new
• Continuous flow valve allows for wall to floor application
• Interior and exterior use

StoneTech Enhancer Sealer enriches the color of stone and provides protection against all stains.

• Enriches the color of stone
• Coverage is approximately 75-250 sq ft per gallon
• Water-based formula for interior use

For use on natural stone such as marble, granite, limestone, bluestone, saltillo, travertine, & sandstone. Best suited for the most porous stone surfaces.

• Advanced penetrating microbond protection
• Maximum protection against most stains
• Preserves the natural look
• For interior and exterior use
• Water-based product

Water, oils and other liquids can easily penetrate stone, leaving behind unsightly stains and damage the stone. Once treated with a protective sealer, natural stone is ready for carefree, everyday use!

• Preserves the natural look of stone
• Heavy-duty protection against all stains
• Water-based formula
• 3-5 years of expected wear on interior surfaces
• Covers 50-400 sq ft per gallon

Provides heavy-duty protection for grout on ceramic and porcelain tile.

• Water-based, low-solids coating for grout
• Mold and mildew-resistant sealer
• pH: 4.5
• Ready-to-use formula
• Covers 600 to 1,000 sq ft per gallon

Beyond protecting and cleaning natural stone, sometimes you need to transform the surface to achieve your desired look. Enhancer Pro will enhance the color of your stone and give you a brilliant shine.

• Enhances stone color
• 3 to 5 years of expected wear
• Heavy-duty protection against all stains
• Solvent based for interior or exterior use
• Covers 150-400 sq ft per gallon

Honing Powder creates an even, honed, flat finish that sets up stone for polishing and shining.

• Covers 750-2,000 sq ft per pound
• Non-acidic
• Sets up stone for polishing and shining

1500 Polishing Powder creates a smooth, satin finish and eliminates etch marks and light wear patterns.

• Eliminates etch marks and light wear patterns
• Creates a smooth, satin finish
• 1500 grit level
• Non-acidic
• Covers 500-1,000 sq ft per pound

2000 Shining Powder from StoneTech creates a high-shine finish and brings back the luster of polished stone.

• Creates a high-shine finish
• Brings back luster of polished stone
• For use on most marble, limestone, travertine and terrazzo
• Non-acidic
• Covers 500-1,000 sq ft per pound

Revitalizer Citrus Cleaner and Protector has a built-in sealer that makes surfaces easier to clean. Its gentle formula has a neutral pH and is safe for daily cleaning and protecting.

• Mold- and mildew-resistant stone protector
• Built-in sealer makes surfaces easier to clean
• pH: 7.0
• Use straight or diliute 32 or more per gallon of water
• Covers 2,000-10,000 sq ft per gallon

Revitalizer Cleaner and Protector is a neutral pH, daily cleaner and protector with built-in sealer for all natural stone surfaces.

• Built-in sealer makes surfaces easier to clean
• Mold- and mildew-resistant protector
• Neutral pH formula
• Ready to use
• Citrus scent