Concrete Floor Sealers, Protectors and Guards

Sealers and protectors that ward off damage from road salt, liquid splash, acidic food spills, and oil damage. These products are easy to apply and help keep your concrete floor looking great, protecting your investment over the long term.

List View Grid View

Set Descending Direction

17 Item(s)

  1. PCM Stain Guard Glossy Sealer and Color Enhancer for Concrete Floors

    PCM Stain Guard is a high-luster interior protective treatment that produces a long-lasting, tough protective shine on interior concrete flatwork. It improves the stain resistance of concrete floors new or old, and makes floors easier to clean and maintain.

    • Improves stain resistance of polished concrete floors
    • Produces long-lasting shine
    • Enhances color of dyed concrete
    • UV stable; will not yellow

    Starting at: $63.80

  2. PROSOCO Consolideck® PolishGuard

    Consolideck PolishGuard is a durable, high-gloss, protective coating that dramatically increases the stain resistance of interior concrete floors.

    • Glossy sealer and protector for concrete floors
    • Perfect for floors hardened and densified with Prosoco LS and LS/CS
    • Adds depth and luster to colored concreted
    • Low odor, easy to apply, fast drying
    • Coverage: 400 to 800 sq ft per gallon

    Starting at: $93.50

  3. PROSOCO Consolideck® LSGuard Glossy

    Consolideck LSGuard combines high-gloss beauty with a high-performing lithium silicate hardener. This copolymer formulation improves the surface sheen, hardness, and stain resistance of concrete or cement terrazzo floors.

    • Improves the surface sheen and stain resistance
    • For indoor use only
    • Produces a high-gloss finish
    • Must  be heat burnished after application
    • Coverage: 2,000 to 3,000 sq ft per gallon

    Starting at: $91.57

  4. PROSOCO Consolideck® SLX100® Water & Oil Repellent

    Consolideck SLX100 Water & Oil Repellent from Prosoco penetrates into concrete substrate and provides long-lasting protection from water- and oil-based liquids. Its small molecular structure allows for maximum penetration at coverage rates higher than that of conventional silanes.

    • Resists water, oil, and food stains
    • Provides long-lasting protection
    • Compatible with lithium silicate hardeners and densifiers
    • Better coverage rates than that of conventional silanes
    • safe for use on surfaces subjected to vehicular traffic

    Starting at: $199.34

  5. PROSOCO Consolideck® Concrete Protector (5 GL)

    Concrete Protector from Consolideck is designed to extend the life of your concrete surfaces, from steel troweled to highly polished, ensuring they clean easily and look amazing for years to come.

    • Provides excellent water, oil, and stain repellency
    • Works on Consolideck LS and LS/CS hardened/densified floors
    • Low-odor allows for interior application to occupied buildings
    • Easy to apply and fast drying
    $448.97
  6. Ameripolish 3D SP Stain Protector

    Formulated with 3D densifier properties to aid in hardening and dust-proofing the concrete surface, Ameripolish 3D SP Stain Protector forms a breathable, water-resistant barrier that helps protect newly polished concrete against liquid damage, stains, and etching.

    • Semi-penetrating/semi-topical stain protector
    • Protects polished and dyed concrete from water-based stains
    • Contains UV stabilizers to protect colorants from fading
    • Coverage: 2,000–2,500 square feet per gallon

    Starting at: $60.00

  7. Ameripolish X-Link Water Based Surface Sealer

    Ameripolish X-Link WB Surface Sealer protects both interior and exterior concrete from oil- and chemical-based stains and damage. This fast-drying formula forms a breathable barrier with added mildew and UV protection.

    • Fast-drying water-based concrete sealer
    • Designed for use on both interior and exterior concrete
    • Creates a breathable oil- and chemical-resistant barrier
    • Coverage: 300–500 square feet per gallon

    Starting at: $31.81

  8. Ameripolish SR2 Solvent-Based Concrete Sealer

    SR2 from Ameripolish is a solvent-based sealer that penetrates deep into dense, hard, and non-porous concrete surfaces to create a breathable, sub-surface barrier that repels both oil- and water-based stains in residential, commercial, and even industrial settings.

    • Non-topical penetrating sealer
    • Excellent stain repellency for residential, commercial, and industrial applications
    • Coverage: 3,000 - 5,000 sq ft per gallon

    Starting at: $150.01

  9. AmeriPolish SR2 Water-Based Stain Resistor (5 GL)

    Ameripolish SR2 WB is a water-based, penetrating stain repellent that protects polished, dyed, and non-dyed concrete from oil- and water-based stains, as well as acidic etching agents. Surfaces with this non-topical sealer breathe and do not trap moisture.

    • Non-topical, water-based penetrating sealer
    • Great alternative when solvent based products are not applicable
    • Protects against oil- and water-based stains, as well as acidic etching agents
    • Coverage: 2,000–3,000 sq ft per gallon
    $380.00
  10. PROSOCO Consolideck® GuardEXT (5 GL)

    Consolideck GuardEXT from Prosoco is a durable, non-yellowing, protective coating that dramatically increases the stain resistance of exterior concrete paving. GuardEXT produces a long-lasting, tough protective shine that helps prevent problems associated with water penetration of concrete.

    • For outdoor use only
    • Enhances stain resistance of exterior concrete
    • Produces long-lasting protective shine
    • UV stable—will not yellow, chip, or flake
    • Extremely easy to apply
    $350.74
  11. PROSOCO Consolideck® Saltguard

    Consolideck Saltguard creates an effective chloride ion screen that protects horizontal and vertical concrete and masonry surfaces from both moisture intrusion and chemical attack from chloride salts. It also reduces rebar corrosion and surface spalling.

    • Low odor
    • Non-film-forming
    • Will not trap moisture
    • Solvent based

    Starting at: $58.98

  12. PROSOCO Consolideck® Saltguard WB

    Consolideck Saltguard is a general-purpose silane/siloxane water repellent and chloride screen for concrete and masonry, including concrete block, and clay and concrete brick surfaces. Saltguard protects horizontal and vertical surfaces from moisture intrusion and chemical attack of chloride salts, reducing rebar corrosion and surface spalling.

    • Low odor
    • Non-film-forming
    • Will not trap moisture
    • Water based
    • No dilution necessary; ready to use

    Starting at: $38.38

  13. PROSOCO Consolideck® DuraSheen (5 GL)
    Consolideck DuraSheen is a non-yellowing curing and sealing compound designed for horizontal concrete where a premium, vibrant gloss and shine are required.
    • Non-yellowing curing and sealing compound
    • Protects against alkali, oil, cleaners, and common chemicals
    • Dries quickly to a hard, glossy, water- and dust-proof barrier
    • Covers 300-600 square feet per gallon
    $179.80
  14. L&M PermaGuard SPS (5 GL)

    PERMAGUARD SPS is a quick-drying, low-odor, water-based solution containing a new generation, VOC-compliant emulsion of organic, crosslinking, and low molecular weight polymers.

    • Provides stain protection with high-gloss finish
    • For concrete, stone, and terrazzo
    • Great for grocery stores, cafeterias, and restaurants
    $524.78
  15. L&M FGS Concrete Conditioner

    FGS Concrete Conditioner is a proprietary concrete cleaner and conditioner designed for on-going maintenance of hardened polished concrete surfaces. This product is highly concentrated and contains state-of-the-art wetting and emulsifying agents.

    • No residue formula.
    • Won't compromise non-slip floors.
    • USDA authorized.
    $122.86
  16. Metzger/McGuire SPF (Stain Preventing Film) for Epoxy Joint Fillers, Clear
    SPF prevents slab staining caused by epoxy, polyurea, and polyurethane fillers and sealants. This water-based, single-component film-forming liquid will protect conventional concrete, colored concrete, stained concrete, tile, and other surfaces.
    • Protects concrete and other surfaces from epoxy joint filler staining
    • Water soluble for easy cleanup and removal
    • Contains no VOCs
    $44.00
  17. Metzger/McGuire SPF-P (Stain Preventing Film) for Polyurea Joint Fillers, Blue
    SPF-P prevents slab staining caused by epoxy, polyurea, and polyurethane fillers and sealants. This water-based, single-component film-forming liquid will protect conventional concrete, colored concrete, stained concrete, tile, and other surfaces.
    • Protects concrete and other surfaces from polyurea joint filler staining
    • Water soluble for easy cleanup and removal
    • Contains no VOCs
    $44.00

List View Grid View

Set Descending Direction

17 Item(s)