Concrete Coatings - Epoxy and Urethane Resins

Jon-Don stocks professional-grade epoxies, primers, and polyurethanes designed for use in a wide variety of facilities, from commercial to industrial, food handling/processing plants to high-end show rooms.

List View Grid View

Set Descending Direction

1-24 of 31

Page
  1. 1
  2. 2

  1. Arizona Polymer Flooring Epoxy 100 Water Based Clear Epoxy, 5 GL Kit (4 GL Part A, 1 GL Part B)

    Epoxy 100 is a two-component water-based epoxy system that features ease of application, very low odor, and excellent overall coating performance. Epoxy 100 is used as a general-purpose coating for concrete floors and as a primer under epoxy, polyurethane, and acrylic materials.  

    • Great as general-purpose coating or epoxy primer
    • Pre-measured kit for easy mixing
    • VOC compliant
    • Must order Part A and Part B for full kit

    Starting at: $62.47

  2. Arizona Polymer Flooring Polyurea 5100, 10 GL Kit (5 GL Part A, 5 GL Part B)

    Polyurea 5100 from Arizona Polymer Flooring is designed to produce very high gloss finish that is both hard and abrasion resistant. This 2-component, ultra high solids, aliphatic polyurea/polyaspartic hybrid is a pigmented material capable of obtaining excellent adhesion to dry, properly prepared concrete.

    • Standard color is clear
    • Available pre-pigmented in 16 standard colors
    • Coverage: 300–350 sq ft per gallon
    • 2-hour dry time for light traffic, 24 hours for vehicle traffic
    • Must order 1 Part A and 1 Part B for full kit

    Starting at: $567.61

  3. Arizona Polymer Flooring Epoxy 100 Water Based Clear Epoxy, 25 GL Kit (20 GL Part A, 5 GL Part B)

    Epoxy 100 is a two component water-based epoxy system that features ease of application, very low odor and excellent overall coating performance. Epoxy 100 is used as a general-purpose coating for concrete floors and as a primer under epoxy, polyurethane, and acrylic materials.  

    • Great as general purpose coating or epoxy primer
    • Pre-measured kit for easy mixing
    • VOC compliant
    • Must order 4 of Part A and 1 of Part B for full kit

    Starting at: $199.87

  4. Arizona Polymer Flooring Polyurethane 501 WB, Clear Gloss, 15 GL Kit (10 GL Part A, 5 GL Part B)

    Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems.

    • Ideal top coat for areas that require maximum gloss retention
    • UV-resistant
    • Coverage: 200 to 350 sq ft per gallon
    • Must have 2 Part A and 1 Part B for full kit

    Starting at: $210.96

  5. Arizona Polymer Flooring Epoxy 400, 15 GL Kit (10 GL Part A, 5 GL Part B), Sterling Gray

    Epoxy 400 is a low-viscosity, 100% solids resin system used in a variety of flooring applications, including high build coatings, aggregate-filled flooring, and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility, and chemical resistance.

    • Pre-pigmented in Sterling Gray
    • Kit is 2 parts A, 1 part B
    • VOC compliant

    Starting at: $272.61

  6. Arizona Polymer Flooring Epoxy 400, 1.5 GL Kit (1 GL Part A, 0.5 GL Part B)

    Epoxy 400 is a low-viscosity 100% solids resin system used in a variety of flooring applications, including high-build coatings, aggregate-filled flooring, and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility, and chemical resistance.

    • Can be mixed with color packs
    • Coverage: Up to 250 sq ft/gal (varies based on substrate profile)
    • VOC compliant
    • Must order Part A and Part B for full kit

    Starting at: $29.68

  7. Arizona Polymer Flooring Epoxy 450, 15 GL Kit (10 GL Part A, 5 GL Part B)

    Arizona Polymer Flooring Epoxy 450 is a medium viscosity, 100% solids resin system used in a variety of flooring applications, including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications.

    • Outstanding balance of physical strength, flexibility, and chemical resistance
    • Can be mixed with color packs
    • Medium viscosity; ideal for a variety of floor applications
    • VOC compliant
    • Must order 2 Part A and 1 Part B for full kit

    Starting at: $229.29

  8. Arizona Polymer Flooring Epoxy 450, 1.5 GL Kit (1 GL Part A, 0.5 GL Part B)

    Arizona Polymer Flooring Epoxy 450 is a medium viscosity, 100% solids resin system used in a variety of flooring applications, including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications.

    • Outstanding balance of physical strength, flexibility and chemical resistance
    • Can be mixed with color packs
    • Medium viscosity; ideal for a variety of floor applications
    • VOC compliant
    • Must order 1 Part A and 1 Part B for full kit

    Starting at: $27.60

  9. Arizona Polymer Flooring Epoxy 400, 15 GL Kit (10 GL Part A, 5 GL Part B)

    Epoxy 400 is a low viscosity, 100% solids resin system used in a variety of flooring applications including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility, and chemical resistance.

    • Can be mixed with color packs
    • Kit is 2 parts A, 1 part B
    • VOC compliant
    • Must order 2 Part A and 1 Part B for full kit

    Starting at: $233.88

  10. Arizona Polymer Flooring Epoxy Novolac 900, 1.5 GL Kit

    Epoxy Nolovac 900 is a solvent-free, multi-functional epoxy system designed to give outstanding resistance to a broad range of chemicals, including 98% sulfuric acid and most solvents. Novolac 900 also offers a workable pot life, blush-free cure, and a low viscosity making aggregate-filled flooring easy to apply.

    • Outstanding resistance to a broad range of chemicals
    • Solvent-free
    • Low viscocity; ideal for use with aggregate-filled flooring
    • Coverage: 200 sq ft per gallon
    • Must order 1 Part A and 1 Part B for full kit

    Starting at: $59.51

  11. Arizona Polymer Flooring Polyurethane 100 VOC, (1 GL Part A, 0.5 GL Part B)

    Polyurethane 100 VOC is a two-component, high-solids aliphatic polyurethane formulated to comply with California VOC regulations. It can be used on both interior and exterior surfaces, and offers exceptional durability, scratch resistance, and chemical resistance.

    • Average coverage rates of 250 to 350 sq ft per gallon
    • Excellent resistance to abrasion and chemicals
    • Low VOC (100 grams/liter)
    • Must have 1 Part A, 1 Part B for full kit

    Starting at: $56.33

  12. Arizona Polymer Flooring Polyurethane 100 VOC, (10 GL Part A, 5 GL Part B)

    Polyurethane 100 VOC is a two-component, high-solids aliphatic polyurethane formulated to comply with California VOC regulations. It can be used on both interior and exterior surfaces and offers exceptional durability, scratch resistance, and chemical resistance.

    • Average coverage rates of 250 to 350 sq ft per gallon
    • Excellent resistance to abrasion and chemicals
    • Low VOC (100 grams/liter)
    • Must order 2 Part A and 1 Part B for full kit

    Starting at: $381.21

  13. Arizona Polymer Flooring Polyurethane 501 WB, Satin Finish (1 GL Part A and 0.5 GL Part B)

    Polyurethane 501 is a high-solids two-component water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems.

    • Ideal top coat for areas that require maximum gloss retention
    • UV resistant
    • Coverage: 200–350 sq ft per gallon
    • Must order Part A and Part B for full kit

    Starting at: $58.86

  14. Arizona Polymer Flooring Polyurethane 501 WB, Satin Finish, (10 GL Part A, 5 GL Part B)

    Polyurethane 501 is a high-solids two-component water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems.

    • Ideal top coat for areas that require maximum gloss retention
    • UV Resistant
    • Coverage: 200–350 sq ft per gallon
    • Must order 2 Part A and 1 Part B for full kit

    Starting at: $264.14

  15. Arizona Polymer Flooring Polyurethane 501 WB, Clear Gloss, 1.5 GL Kit (1 GL Part A, 0.5 GL Part B)

    Polyurethane 501 is a high-solids two-component water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems.

    • Ideal top coat for areas that require maximum gloss retention
    • UV-resistant
    • Coverage: 200 to 350 sq ft per gallon
    • Must order 1 Part A and 1 Part B for full kit

    Starting at: $48.69

  16. Arizona Polymer Flooring Polyaspartic 7500, (5 GL Part A, 5 GL Part B)

    Polyaspartic 7500 is a two-component high-solids aliphatic polyaspartic that us ideal as a finish coat in color chip and color quartz flooring, as well as various types of decorative architectural concrete applications. It is also well-suited for automotive repair facilities, aircraft hangars, and clean rooms.

    • Rapid curing; return to full service in 24 hours
    • Excellent resistance to a broad range of chemicals
    • Very high gloss finish
    • Coverage: 200–300 sq ft per gallon
    • Must order 1 Part A and 1 Part B for full kit

    Starting at: $368.91

  17. Arizona Polymer Flooring Polyurea 5100, 1 GL Kit (0.5 GL Part A, 0.5 GL Part B)

    Polyurea 5100 from Arizona Polymer Flooring is designed to produce a very-high-gloss finish that is both hard and abrasion-resistant. This 2-component ultra-high-solids, aliphatic polyurea/polyaspartic hybrid is a pigmented material capable of obtaining excellent adhesion to dry, properly prepared concrete.

    • Standard color is clear
    • Available pre-pigmented in 16 standard colors
    • Coverage: 300–350 sq ft per gallon
    • 2-hour dry time for light traffic, 24 hours for vehicle traffic
    • Must order 1 Part A and 1 Part B for full kit

    Starting at: $58.99

  18. Arizona Polymer Flooring Polyaspartic 7500, (0.5 GL Part A, 0.5 GL Part B)

    Polyaspartic 7500 is ideal as a finish coat in color chip and color quartz flooring, as well as various types of decorative architectural concrete applications. It is also well-suited for automotive repair facilities, aircraft hangars, and clean rooms.

    • Rapid curing; return to full service in 24 hours
    • Hard finish and abrasion-resistant
    • Excellent resistance to a broad range of chemicals
    • Very high gloss finish
    • Coverage: 200–300 sq ft per gallon
    • Must order Part A and Part B for full kit

    Starting at: $38.80

  19. VaporSolve 100 Standard

    VaporSolve 100 Standard is a 100% solid remediation epoxy. It is a very permeable, low viscosity, hydrophobic resin system that cures on damp or wet concrete. It can be used as a single coat remediation system or as a top coat over VaporSolve Primer (Ultra System).

    • 3-gallon kit
    • Very permeable
    • Low viscosity
    $201.00
  20. VaporSolve 100 Fast Cure

    For projects that need a faster turnaround, turn to VaporSolve 100 Fast Cure. Floors will be dry to the touch in as little as 3 hours, and ready for the final flooring application in 6 hours.

    • 3-gallon kit
    • Faster curing
    • Very permeable
    • Low viscosity
    $210.00
  21. VaporSolve Fresh Concentrate

    When newly installed concrete dries too slowly to meet a specific construction schedule, the VaporSolve Fresh Concrete System is ideal. The unique water-based epoxy formulation will bond to 6 to 24 hour old concrete and virtually eliminates the evaporation of water from the top of the slab serving as the ultimate curing compound.

    • 2-gallon kit
    • Unique water-based epoxy formulation
    • Bonds to 6-24 hour-old concrete
    • Eliminates need for sub-slab vapor retarder, curing compound, and shot blasting
    $138.00
  22. VaporSolve Flex Joint Filler

    VaporSolve Joint Filler is a non-shrinking, semi-rigid epoxy paste that resists long-term moisture and alkalinity. It quickly fills cracks and joints, preparing concrete that will receive any of the VaporSolve systems.

    • 3/4-gallon kit
    • Standard cure
    • Thickened for application to joints and cracks
    $53.25
  23. VaporSolve Primer

    VaporSolve Primer is a water-based epoxy material with deep penetration and adhesion to concrete. It has a superior performance to 100% solids remediation materials over contaminated concrete and eliminates or greatly reduces concrete outgassing.

    • 3-gallon kit
    • Water-based
    • Eliminates or greatly reduces concrete outgassing
    • Coverage: 200 sq ft per gallon
    $171.00
  24. CAB-O-SIL M-5 Epoxy Thickener

    CAB-O-SIL M-5 is a medium surface fumed silica that imparts significant increase in viscosity in liquid systems, free flow of powders, and reinforcement of silicone and organic rubbers.

    • Can be used alone for extra smooth finish
    • Can be used in conjunction with other epoxy fillers
    • Provides an extremely hard and high-density finish
    $142.00

List View Grid View

Set Descending Direction

1-24 of 31

Page
  1. 1
  2. 2