AfterShock is an EPA-registered antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface.

• Coverage: 75-400 sq ft per gallon
• Goes on white, dries white
• EPA-registered (EPA Reg No: 73884-1)
• 10 year warranty
• CANNOT SHIP TO CALIFORNIA

IAQ 3000 is a high quality interior and exterior block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before top coating. This product contains mineral type fillers and fine mineral aggregates which fill voids in masonry surfaces. This 100% acrylic block filler is easy to apply, alkali resistant and provides a uniform surface capable of receiving all types of finish coats.

• Coverage: 100-200 sq ft per gallon
• Goes on white, dries white
• Complies with the requirements for LEED® EQ Credit 4.2

Stop flash rusting before it starts! IAQ 4000 is a rust inhibiting 100% acrylic latex metal coating for use on ferrous metal, galvanized metal and other surfaces exposed to general industrial and atmospheric conditions. It is ideal for both new and previously coated roof decks, metal paneling, structural steel, corrugated metal siding, and miscellaneous iron and bar joists.

• Coverage: 200-450 sq ft per gallon
• Goes on white, dries white
• Ideal for priming metal studs after removing infested drywall
• Complies with the requirements for LEED® EQ Credit 4.2

Fiberlock IAQ 5000 is a quick-drying, high-performance 100% acrylic latex coating specifically designed to prime stained or water-damaged surfaces before applying a mold-resistant coating.

• Coverage: 100-500 sq ft per gallon
• Goes on white, dries white
• Contains EPA-registered antimicrobials
• Complies with the requirements for LEED® EQ Credit 4.2

Fiberlock IAQ 6000 is an extremely durable coating developed to withstand moist, humid conditions that provide the ideal environment for fungal growth. This 100% acrylic coating offers durability in combination with excellent mold resistance.

• Coverage: 150-400 sq ft per gallon
• Goes on white, dries white
• Contains EPA-registered antimicrobials
• 10 year warranty
• Qualifies for LEED® EQ Credit 4.2

Fiberlock IAQ 6000HD is a high-build, mold-resistant coating designed to help prevent mold growth from occurring in new building construction.

• Coverage: 150-400 sq ft per gallon
• Goes on white, dries white
• Contains EPA-registered antimicrobials
• 10 year warranty
• Complies with the requirements for LEED® EQ Credit

IAQ 6040 is a low-viscosity, translucent violet sealant designed to seal new construction materials and resist fungal growth. This water-based coating contains EPA-registered antimicrobials that inhibit the growth of mold on the cured film.

• Coverage: 200-450 sq ft per gallon
• Translucent violet finish
• Complies with the requirements for LEED® EQ Credit 4.2
• Contains EPA-registered anti-microbials
• 10 year warranty

IAQ 6100 is a clear mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film.

• Coverage: 200-600 sq ft per gallon
• Goes on white, dries clear
• Contains EPA-registered antimicrobials
• 10 year warranty
• Qualifies for LEED® EQ Credit 4.2

IAQ 6500 is a black, mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film.

• Coverage: 150-400 sq ft per gallon
• Goes on black, dries black
• Qualifies for LEED® EQ Credit 4.2
• Contains EPA-registered antimicrobials; 10 year warranty

Fiberlock IAQ 7000 is a quick-drying, water-based adhesive coating/encapsulant for use on duct liner insulation surfaces. Fiberlock IAQ 7000 dries to form a durable, flexible, moisture-resistant protective coating on the duct liner insulation material.

• Coverage: 100-200 sq ft per gallon
• Goes on white, dries white
• For use on fiberglass duct/duct liners
• Contains EPA-registered fungicide

Fiberlock IAQ 7500 is a quick-drying, water-based adhesive coating/encapsulant for use on duct liner insulation surfaces. It dries to form a durable, flexible, moisture-resistant protective coating on the duct liner insulation material.

• Coverage: 100-200 sq ft per gallon
• Goes on white, dries clear
• Contains EPA-registered fungicide
• For use on fiberglass duct/duct liners

Fiberlock IAQ 8000 is a dual-purpose, high-performance coating designed to penetrate and reinforce duct liner or duct board insulation materials. It can also be used to seal unlined duct work to prevent microbial particulate from becoming airborne.

• Coverage: 75-175 sq ft per gallon
• Goes on white, dries white
• For use on lined and/or unlined duct work
• Contains EPA-registered fungicide

Fiberlock IAQ 8500 is a dual-purpose, high performance coating designed to penetrate and reinforce duct liner or duct board insulation materials. It can also be used to seal unlined duct work to prevent microbial particulate from becoming airborne.

• Coverage: 75-175 sq ft per gallon
• Goes on black, dries black
• Contains EPA-registered fungicide
• For use on lined and/or unlined duct work

Fiberlock IAQ 9000 is a low-odor waterproofing coating that is specially formulated to stop water from penetrating through a variety of interior and exterior surfaces including above or below grade masonry walls.

• Coverage: 100 sq ft per gallon
• Goes on white, dries white
• Contains EPA-registered antimicrobials
• Holds back 10 lbs of water pressure per square inch
• 10 year warranty

LBC is a safe and effective alternative to the costly process of lead based paint removal and is accepted in all 50 states as a permanent lead abatement method.

• Goes on white, dries white
• Coverage of 80-120 ft2/gal
• Dries in 1-2 hours
• Meets/Surpasses ASTM E-1795 Standard for Lead-Based Paint Encapsulants for both indoor and outdoor use

Foster® 40-26™ Waterbase Primer bonds to the surface of clean bare metal or sound rusted metal effectively retarding natural corrosive activity, providing a sound substrate for compatible surface finishing material. Properly installed, Foster 40-26 will enhance aesthetic qualities, extend the functional usability, and reduce periodic maintenance.

• Goes On White, Dries Translucent Tan
• Easy to apply - Use brush, spray, or roller
• Dries Quickly - Recoat in as little as an hour

Foster® Continuous Defense 40-20™ Fungicidal Protective Coating is EPA registered and the industry's leading coating. It is formulated to prevent the spread of mold and bacteria in areas such as walls, ceilings, interior and HVAC ducting.

• Coverage: 80 sq ft per gallon
• Goes on white, dries white
• EPA-registered coating
• 10 year warranty
• Complies with the requirements for LEED® EQ Credit 4.2

Foster® Full Defense Fungicidal Protective Coating (40-25) kills residual mold and mildew and protects the surface of unfinished wood, drywall, oriented strand board, metal, masonry, and other building materials from fungal growth. 

• Coverage: 300 sq ft per gallon
• Goes on white, dries white
• EPA-registered (EPA Reg No: 63836-2)
• 10 year warranty
• Complies with the requirements for LEED® EQ Credit 4.2

Foster® Interior Defense 40-50™ Mold Resistant Coating is a high-quality, low-viscosity mold-resistant coating. It provides ideal protection of its surface in areas prone to mold growth.

• Coverage: 250-400 sq ft per gallon
• Goes on white, dries white
• Contains EPA-registered antimicrobials
• 5 year warranty
• Complies with the requirements for LEED® EQ Credit 4.2

Foster Sheer Defense 40-51 is designed as a clear coat for a long-term protection against mold, mildew and other odor-causing bacteria.

• Coverage: 250-600 sq ft per gallon
• Goes on white, dries clear
• Contains EPA-registered antimicrobials
• 5 year warranty
• Complies with the requirements for LEED® EQ Credit 4.2

PERMA-WHITE® Interior Eggshell Paint is a washable eggshell finish combined with a mold and mildew-proof* paint film. Recommended for application in high-humidity areas where a durable, low sheen is desired such as finished basements and kitchens. 

• Coverage: Up to 400 sq ft per gallon
• Goes on white, dries white (can be tinted)
• Contains EPA-registered anti-microbials
• 5 year warranty
• Eggshell finish

PERMA-WHITE® Interior Semi-Gloss Paint provides a durable semi-gloss finish that has the highest level of scrubbability with a mold and mildew-proof paint film. The best choice for high-traffic areas exposed to demanding wear and tear. 

• Coverage: Up to 400 sq ft per gallon
• Goes on white, dries white (can be tinted)
• Contains EPA-registered anti-microbials
• 5 year warranty
• Semi-Gloss Finish

Piranha 2 professional paint remover attacks multiple layers of lead-based paint in a single application.

• Heavy-duty, fast-acting
• Attacks as many as 30 layers of lead-based paint in a single application
• Removes difficult paints, varnishes, shellacs, lacquers, and enamels
• Will not raise the grain of wood or corrode metals