Mold Stain Removers and Water Damage Cleaners

List View Grid View

Set Descending Direction

18 Item(s)

  1. Bad Axe MMR Mold Stain Remover

    MMR Mold Stain Remover quickly removes stubborn mold stains on building substrate materials, such as wood, concrete, cinder block, hardie board, and vinyl siding. It's ideal for use in attics, crawlspaces, and anywhere else mold stains are a common concern.

    • Removes mold stains quickly
    • Easy application process; no mixing required!
    • pH: 8.0–9.0
    • Ready-to-use formula
    • Coverage: 175–250 sq ft per gallon

    Starting at: $34.99

  2. Fiberlock IAQ Advanced Peroxide Cleaner

    IAQ Advanced Peroxide Cleaner is the most advanced cleaner available for the restoration and remediation professional. It aggressively removes stains and odors caused by mold, mildew, bacteria, and other microbial growth.

    • For use in mold remediation and water damage restoration
    • Penetrates deep into the substrate to remove stains
    • Does not leave chemical residue

    Starting at: $80.41

  3. Concrobium® Mold Stain Remover

    Concrobium Mold Stain Remover employs liquid oxidative technology to facilitate physical mold removal, but without the harsh chemicals associated with traditional oxidation products.

    • Removes tough mold stains
    • No brushing, blasting, or sanding required
    • Non-foaming solution
    • No special equipment or training required
    • No scrubbing or cleanup required after application

    Starting at: $34.99

  4. Concrobium® Mold Stain Remover Liquid

    Remove tough mold stains with no brushing, sanding, or blasting required! Concrobium Mold Stain Remover employs liquid oxidative technology to facilitate physical mold removal, but without the harsh chemicals associated with traditional oxidation products.

    • Removes tough mold stains
    • No brushing, blasting, or sanding required
    • Non-foaming solution
    • No special equipment or training required
    • No scrubbing or cleanup required after application

    Starting at: $39.99

  5. Concrobium® Mold Control

    Concrobium Mold Control is a dual purpose, non-toxic antimicrobial that can be deployed during the “knock down” phases of restoration projects to control mold spore proliferation, and it can also be applied on restored surfaces for ongoing mold protection.

    • Dual-purpose formula remediates and prevents mold
    • EPA registered for use on hard surfaces and fabrics
    • No bleach, ammonia, or VOCs
    • Category IV rating—requires no PPE to apply

    Starting at: $31.99

  6. Fiberlock IAQ 1000 Peroxide Based Cleaner

    Fiberlock IAQ 1000 is a hydrogen peroxide-based, chlorine-free cleaner that is perfect for mold remediation and water damage restoration projects. pH-neutral, and contains an agent that will whiten and brighten while cleaning, but does not contain sodium hypochlorite (bleach).

    • Ready to use
    • Hydrogen-peroxide-based formula; no bleach
    • Biodegradable
    • No dyes, no perfumes, non-corrosive
    $83.93
  7. Fiberlock Instant Mold Stain Remover (4 GL)

    Using a proprietary formula that combines a stabilized bleach-based solution coupled with a tailored surfactant, Fiberlock Instant Mold Stain Remover aggressively removes stains from mold and mildew. It penetrates deep into wood and concrete substrates for effective removal.

    • Aggressive stain remover
    • Easy application
    • pH: 12.0–14.0
    • Ready-to-use formula
    • Coverage: 200–500 sq ft per gallon
    $127.38
  8. Fiberlock ShockWave Hydrogen Peroxide Disinfectant & Cleaner

    This EPA Category IV disinfectant and cleaner is ideal for use in all restoration and remediation applications, including mold remediation, water damage restoration, and biohazard decontamination.

    • Peroxide cleaner and disinfectant
    • EPA Registered (74559-1-73884)
    • pH: 2.5–3.5
    • Ready to use

    Starting at: $36.75

  9. Fiberlock ShockWave Disinfectant & Cleaner

    ShockWave is an EPA-registered, quaternary ammonium chloride cleaner, disinfectant, and sanitizer designed for use on various surfaces subject to microbial contamination. Strong enough to be used as a hospital grade disinfectant.

    • Quaternary ammonium chloride disinfectant
    • EPA Registered (61178-1-73884)
    • pH: 11.7
    • Variable dilutions
    • Over 140 organism kill claims

    Starting at: $37.66

  10. Fiberlock IAQ 2000 Disinfectant, Cleaner, *Virucide, Deodorizer, Fungicide, Mildewstat

    Fiberlock IAQ 2000 is an EPA registered disinfectant and cleaner designed to kill fungal, bacterial, and virucidal growth. IAQ 2000 is a concentrated, phosphate-free formulation designed for use in a variety of buildings, both residential and commercial. It disinfects hard, nonporous, inanimate environmental surfaces, including floors and walls that are prone to problems caused by microorganisms.

    • EPA registered quaternary disinfectant
    • Dilutes 1:64 (dependent on application)
    • pH: 11.7
    • Coverage contingent upon application and surface

    Starting at: $20.10

  11. Fiberlock HydroBoost Advanced Peroxide Cleaner Additive

    HydroBoost is a unique and powerful additive that enhances the stain removal, lifting, and cleaning power of Advanced Peroxide Cleaner. Ideal for situations that demand extreme cleaning.

    • Provides Fiberlock APC with boosted cleaning power
    • Extra stain removing power for labor savings
    • pH: 13.0–14.0
    • Coverage: 500–1,200 sq ft per gallon

    Starting at: $10.17

  12. PRS Water Damage Preclean

    PRS Water Damage Preclean is a biological based initial treatment for water damage claims, even black water losses. PRS Water Damage Preclean digests odors and soils, including those from fecal matter and urine into water and carbon dioxide.

    • Works fast to remove odors
    • Coverage of 400 to 1,000 sq ft per gallon
    • pH: 6.9–7.9
    • Non-toxic and biodegradable
    • Variable dilutions

    Starting at: $55.21

  13. PRS Water Damage Postclean

    Ideal for all levels of water damage, even black water, PRS Water Damage Post Clean uses spore strains and bio-based cleaning technology to digest odors and soils.

    • Ideal for all water damage, even black water
    • Non-toxic and biodegradable
    • pH: 6.9–7.9
    • For use on porous material
    • Dilute 1 gallon to 1 gallon of water

    Starting at: $47.51

  14. Bad Axe Particulate Conqueror

    Bad Axe Particulate Conqueror is a mild blend of uniquely charged surfactants that surrounds contaminants in the air and on surfaces, immobilizing them on surfaces to be cleaned before, during, and after the remediation or restoration procedure.

    • Cleaning aid for remediation/restoration jobs
    • Helps control airborne and surface particulates
    • pH: 6.0
    • Dilute 16 oz per gallon of water
    • Use with wet fogger or spray

    Starting at: $19.99

  15. Bad Axe ONSLAUGHT Quaternary Disinfectant

    Bad Axe ONSLAUGHT is the ideal solution for 1-step cleaning and disinfecting on water damage restoration and mold remediation projects. Its quaternary ammonium chloride formulation also functions as a fungicide, virucide, bacteriocide, cleaner, and sanitizer.

    • EPA registered (#61178-1-88903)
    • Kill claim for nearly 140 common pathogens
    • pH: 11.5–12.5
    • For use on porous and non-porous surfaces
    • Variable dilutions

    Starting at: $34.40

  16. Bad Axe Ravage Rinse Foaming Cleaner, 4 lbs

    Ravage Rinse is specifically developed for use on restoration jobs where a dependable multi-purpose cleaner is required. This wettable powder uses the power of oxygen to remove tough organic stains from a variety of surfaces, from carpet to hard floors, plastic, tile and grout, and more.

    • Multi-purpose cleaner removes tough organic stains
    • Use on restoration jobs, including Cat III, trauma scene, etc.
    • pH: 11.0
    • Low toxicity and VOC levels
    • Variable dilutions

    Starting at: $36.99

  17. Fiberlock HydroBrite, 1.65 lbs (12 PK)

    This powder-based, stain-removing additive reaches deep into the substrate to eliminate the most deeply embedded dirt and debris. The adjustable formula allows you to add more or less HydroBrite to boost Advanced Peroxide Cleaner, depending on the level of stain severity.

    • Removes mold and mildew stains
    • Lifts and removes deeply embedded dirt and debris
    • pH: 12.5–13.5
    • Designed for use with Fiberlock IAQ Advanced Peroxide Cleaner ONLY
    • Ideal for OSB, plywood, wood framing, and concrete
    $185.43
  18. Concrobium® Mold Control, California Compliant

    This dual-purpose non-toxic antimicrobial can be deployed during the “knock down” phases of restoration projects to control mold spore proliferation. It can also be applied on restored surfaces for ongoing mold protection. California-compliant formulation.

    • California-compliant formulation
    • Dual-purpose formula remediates and prevents mold
    • EPA registered for use on hard surfaces and fabrics
    • No bleach, ammonia, or VOCs
    • Category IV rating—requires no PPE to apply

    Starting at: $32.31

List View Grid View

Set Descending Direction

18 Item(s)